NEW PRODUCTS

 

Big Dog Fuse Block

Big Dog Fuse Block

Big Dog Fuse Block 1/4" stud for battery power input. 6 x fused .250 male blade terminals for fused power outputs.

  • Price: $15.99

3 ROW SUPER COOL ALUMINUM RADIATOR CHEVY MUSTANG SWAP

3 ROW SUPER COOL  ALUMINUM RADIATOR CHEVY MUSTANG SWAP

'' THE BOSS'' 28 X 19'' X 4 1/4'' ALUMINUM RADIATOR FOR BIG HI COMPRESSION CHEVY ENGINES IN FOX BODY CARS FROM NORTHERN RADIATOR. THREE 1 INCH CORES WILL COOL THAT BIG BLOCK DOWN! AFTERMARKET HOLDDOWNS REQUIRED. ELECTRIC DUAL FAN KIT AVAILABLE .

  • Price: $489.90

8.8 PINION YOKE , CHROMOLY 1350 JOINT SIZE

8.8 PINION YOKE , CHROMOLY  1350 JOINT SIZE

STRANGE ENGINEERING Pinion Yoke, CHROMOLY 30-Spline, 1350-Style Joint For Ford 8.8 axles

  • Price: $139.99

AEROSPACE COMPONENTS ELECTRIC WATER PUMP SBC SWAP

AEROSPACE COMPONENTS ELECTRIC WATER PUMP SBC SWAP

Aerospace Components billet water pump contains an efficient 4-amp electric motor that flows over 37 gallons per minute. SMALL BLOCK CHEVY W/ CHEVY STYLE RADIATOR 1 1/4, 1.5 OR 16AN FITTING. PLEASE SPECIFY .Designed for strength and reliability,...

  • Price: $351.65

BMR Rear Cradle Bushing Kit 2015-2017 Mustang

BMR Rear Cradle Bushing Kit 2015-2017 Mustang

Significantly reduce rear cradle movement in your S550 Mustang with a Polyurethane Rear Cradle Bushing Kit from BMR Suspension. These bushings are made from low-deflection, 95-durometer polyurethane, which is known for its high stiffness, low...

  • Price: $99.95

Check Engine Light Eliminator O2 Fitting with Adj. Jets J STYLE

Check Engine Light Eliminator O2 Fitting with Adj. Jets J STYLE

Male end threads into existing M18 x 1.5 O2 Bungs/ J STYLE FOR CLEARANCE ISSUES - O2 Sensor Threads into female end - Use one of the three (3) included "jets" to help fool the O2 Sensor and eliminate Check Engine Light Condition They are very...

  • Price: $31.95

Leash Electronics Boost Controller

Leash Electronics  Boost Controller

Street/Strip uses of manifold pressure OR co2 pressure for control and it does away with the activation wire and the controller automaticly activates when it senses more that 2psi boost which makes it work VERY well on street cars since its...

  • Price: $549.99

1979-04 Mustang Drop K Member With Removable Center

1979-04 Mustang Drop K Member With Removable Center

Full race drop K member designed for use with motor and midplates. This K member is ultra lightweight and accepts a pinto rack. K member comes ready to bolt in and is offered with or without powdercoating which comes in silver. This has a...

  • Price: $449.00

1979-04 Mustang Foot Box Trans Vent Can

1979-04 Mustang Foot Box Trans Vent Can

Made from premium 5000 series aluminum Mounts under the foot area on drivers side under the car Properly vent your transmission to prevent malfunction and parts failure May not clear certain under the car headers/Primarily designed for front exit...

  • Price: $125.00

1979-2004 Mustang Wheelie Ski Set

1979-2004 Mustang Wheelie Ski Set

1979-04 Mustang wheelie ski skid plates. Save engine oilpans, transmission pans, headers and your investment. Sometimes in drag racing wheelies are out of your control and we have made a product to help save your expensive parts. This ski bolts...

  • Price: $189.99

2005-2014 Mustang S197 Wheelie Ski

2005-2014 Mustang S197 Wheelie Ski

Protect your headers, oil & transmission pans from impact. Easy bolt on installation includes hardware. 4130 Chromoly Tig welded Powdercoated

  • Price: $199.00

2011-2014 MUSTANG GT AIRAID COLD AIR INTAKE SYSTEM FREE UPS

2011-2014  MUSTANG GT AIRAID  COLD AIR INTAKE SYSTEM FREE UPS

2011-2014 MUSTANG GT AIRAID MXP COLD AIR KIT The AIRAID MXP Series represents the ultimate in Cold Air Induction systems. Designed for high-performance gas and diesel applications, the MXP Intakes start with a new one piece roto-molded air box...

  • Price: $344.99

2015 AIRAID COLD AIR KIT MUSTANG 5.0 BLACK FILTER FEE UPS!

2015 AIRAID COLD AIR KIT MUSTANG 5.0 BLACK FILTER FEE UPS!

SynthaFlow MXP Series, Cold Air, BLACK Filter, Black Plastic Tube, 2015 MUSTANG GT 5.0L, AIRAID MXP Series Cold Air Dam Intake System; SynthaFlow Oiled; Incl. Intake Tube; Red; The AIRAID MXP Series represents the ultimate in Cold Air Induction...

  • Price: $357.99

2015 AIRAID COLD AIR KIT MUSTANG 5.0 FREE 48 STATE SHIPPING!

2015 AIRAID COLD AIR KIT MUSTANG 5.0 FREE 48 STATE SHIPPING!

SynthaFlow MXP Series, Cold Air, Red Filter, Black Plastic Tube, 2015 MUSTANG GT 5.0L, AIRAID MXP Series Cold Air Dam Intake System; SynthaFlow Oiled; Incl. Intake Tube; Red; The AIRAID MXP Series represents the ultimate in Cold Air Induction...

  • Price: $349.95

2015 GT EXHAUST KIT STAINLESS WORKS 3'' W/H PIPE for SW HEADERS

2015 GT EXHAUST KIT STAINLESS WORKS 3'' W/H PIPE for SW HEADERS

2015 Mustang GT 5.0L 304 stainless steel 3" catback dual-exhaust W/ XPIPE & retro chambered mufflers and mirror-polished stainless steel slash-cut conical double-wall tips.BOLTS DIRECTLY TO STAINLESS WORKS LONGTUBE HEADER KIT Includes hangers...

  • Price: $1,124.99

2015 GT EXHAUST KIT STAINLESS WORKS 3'' W/XPIPE for SW HEADERS

2015 GT EXHAUST KIT STAINLESS WORKS 3'' W/XPIPE for SW HEADERS

2015 Mustang GT 5.0L 304 stainless steel 3" catback dual-exhaust W/ XPIPE & retro chambered mufflers and mirror-polished stainless steel slash-cut conical double-wall tips.BOLTS DIRECTLY TO STAINLESS WORKS LONGTUBE HEADER KIT Includes hangers...

  • Price: $1,124.99

2015 MUSTANG EXHAUST KIT STAINLESS WORKS 3'' W/H PIPE

2015 MUSTANG EXHAUST KIT STAINLESS WORKS 3'' W/H PIPE

2015 Mustang GT 5.0L 304 stainless steel 3" catback dual-exhaust W/ H PIPE & retro chambered mufflers and mirror-polished stainless steel slash-cut conical double-wall tips. BOLTS TO FACTORY CONNECTION POINT Includes hangers and clamps; superior performance with a lifetime guarantee.

  • Price: $1,124.99

2015 MUSTANG EXHAUST KIT STAINLESS WORKS 3'' W/XPIPE

2015 MUSTANG EXHAUST KIT STAINLESS WORKS 3'' W/XPIPE

2015 Mustang GT 5.0L 304 stainless steel 3" catback dual-exhaust W/ XPIPE & retro chambered mufflers and mirror-polished stainless steel slash-cut conical double-wall tips. Includes hangers and clamps; superior performance with a lifetime guarantee.

  • Price: $1,124.99

2015 MUSTANG GT LONG TUBE HEADERS OFF ROAD FOR SW EXHAUST

2015 MUSTANG GT LONG TUBE HEADERS OFF ROAD FOR SW EXHAUST

STAINLESS WORKS 2015 Ford Mustang Headers -With OFF ROAD PIPES that connect to STAINLESS WORKS EXHAUST . Increase performance and improve sound with our Ford Mustang headers. Our 2015 Mustang GT headers are designed with 1-7/8" primary tubes and...

  • Price: $1,275.99

2015 MUSTANG GT LONG TUBE HEADERS W/ HI FLOW CATS

2015 MUSTANG GT LONG TUBE HEADERS W/ HI FLOW CATS

STAINLESS WORKS 2015 Ford Mustang Headers -With hi flow cats that connect to the factory exhaust. Increase performance and improve sound with our Ford Mustang headers. Our 2015 Mustang GT headers are designed with 1-7/8" primary tubes and 3"...

  • Price: $1,489.99

2015 MUSTANG GT LONG TUBE HEADERS W/ HI FLOW CATS FOR SW EXHAUST

2015 MUSTANG GT LONG TUBE HEADERS W/ HI FLOW CATS FOR SW EXHAUST

STAINLESS WORKS 2015 Ford Mustang Headers -With hi flow cats that connect to STAINLESS WORKS EXHAUST KIT Increase performance and improve sound with our Ford Mustang headers. Our 2015 Mustang GT headers are designed with 1-7/8" primary tubes and...

  • Price: $1,489.99

2015 MUSTANG GT LONG TUBE HEADERS W/ OFF ROAD PIPES

2015 MUSTANG GT LONG TUBE HEADERS W/ OFF ROAD PIPES

STAINLESS WORKS 2015 Ford Mustang Headers -With OFF ROAD PIPES that connect to the factory exhaust. Increase performance and improve sound with our Ford Mustang headers. Our 2015 Mustang GT headers are designed with 1-7/8" primary tubes and 3"...

  • Price: $1,275.99

289-302 BILLET RACE DISTRIBUTOR

289-302 BILLET RACE DISTRIBUTOR

This high performance distributor is an excellent choice for many types of motorsports. Requires an aftermarket ignition box (such as an MSD, Accel, Crane or Mallory) and an external coil such as ALL81230. Housing is CNC-machined 6061-T6 aluminum...

  • Price: $219.99

302HO BILLET ALUMINUM WATER NECK FOR 1.5'' HOSE

302HO   BILLET ALUMINUM WATER NECK FOR 1.5'' HOSE

CANTON RACING BILLET ALUMINUM WATER NECK FOR 302 5.0 HO   ENGINES WITH 90 DEGREE NECK. STAINLESS CAP SCREWS. ROTATES 360 DEGREES FOR MAX ADJUSTABILITY. FOR 1.5'' HOSE. 

  • Price: $104.99

351C-429-460 BILLET RACE DISTRIBUTOR

351C-429-460 BILLET RACE DISTRIBUTOR

This high performance distributor FOR 351C-429-460 ENGINES is an excellent choice for many types of motorsports. Requires an aftermarket ignition box (such as an MSD, Accel, Crane or Mallory) and an external coil such as ALL81230. Housing is...

  • Price: $219.99

351C-460 BILLET ALUMINUM WATER NECK FOR 1.5'' HOSE

351C-460  BILLET ALUMINUM WATER NECK FOR 1.5'' HOSE

CANTON RACING BILLET ALUMINUM WATER NECK FOR351C-429-460  ENGINES. STAINLESS CAP SCREWS. ROTATES 360 DEGREES FOR MAX ADJUSTABILITY. FOR 1.5'' HOSE. 

  • Price: $104.99

351C-460 BILLET ALUMINUM WATER NECK FOR 16AN HOSE

351C-460  BILLET ALUMINUM WATER NECK FOR 16AN HOSE

 BILLET ALUMINUM WATER NECK FOR 351C-429-460 ENGINES. 16AN FITTING .STAINLESS CAP SCREWS.

  • Price: $69.99

351W BILLET RACE DISTRIBUTOR

351W  BILLET RACE DISTRIBUTOR

This high performance distributor FOR 351W is an excellent choice for many types of motorsports. Requires an aftermarket ignition box (such as an MSD, Accel, Crane or Mallory) and an external coil such as ALL81230. Housing is CNC-machined 6061-T6...

  • Price: $219.99

460 CAMSHAFT BELT DRIVE FREE SHIPPING!

460 CAMSHAFT BELT DRIVE  FREE SHIPPING!

INNOVATORS WEST NEW 460 CAMSHAFT BELT DRIVE.Made entirely in house, the belt drives feature a billet machined aluminum cover, anodized precision machined pulleys and a top quality Goodyear belt.

  • Price: $1,089.99

79-2004 BOLT IN TRANSMISSION CROSSMEMBER

79-2004 BOLT IN TRANSMISSION CROSSMEMBER

This FACTORY OFFSET trans crossmember is a true bolt in in disguise.Will work for a TH400, Power Glide. Comes powder coated black & comes with all necessary Grade 8 Hardware for mounting.

  • Price: $189.00

79-2004 BOLT IN TRANSMISSION CROSSMEMBER CENTERED

79-2004 BOLT IN TRANSMISSION CROSSMEMBER CENTERED

This CENTERED trans crossmember is a true bolt in in disguise.Will work for a TH400, Power Glide. Comes powder coated black & comes with all necessary Grade 8 Hardware for mounting.

  • Price: $189.00

8.8 34 SPLINE TRACTION LOK DIFFERENTIAL 2015/ IRS

8.8 34 SPLINE TRACTION LOK DIFFERENTIAL 2015/ IRS

FORD RACING 2015 8.8 TRACTION LOK DIFFERENTIAL. 34 SPLINE.

  • Price: $179.99

ACCUFAB 105MM RACE THROTTLE BODY w/V-BAND KIT

ACCUFAB 105MM RACE THROTTLE BODY w/V-BAND KIT

ACCUFAB BILLET ALUMINUM Ford Throttle Body, Race 105 MM THE "BIG DADDY" INCLUDES V-BAND ASSEMBLY. FITS 86-93 MUSTANGS OR OTHER CUSTOM APPLICATIONS. All 105mm throttle body versions measure 105mm at the blade and each has a 4.5" inlet. There is no vacuum elbow and 4.5" tubing/hose is required.

  • Price: $489.90

ACCUFAB 90MM RACE THROTTLE BODY w/V-BAND KIT

ACCUFAB 90MM RACE THROTTLE BODY w/V-BAND KIT

ACCUFAB BILLET ALUMINUM Ford Throttle Body, Race 90MM INCLUDES V-BAND ASSEMBLY. FITS 86-93 MUSTANGS OR OTHER CUSTOM APPLICATIONS. This 90mm upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for...

  • Price: $409.95

ACT HD CLUTCH KIT 2005-10 4.6 MUSTANGS

ACT HD CLUTCH KIT 2005-10 4.6 MUSTANGS

FM2-HDSS kit features ACT's most popular Heavy Duty pressure plate and most popular street disc. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms...

  • Price: $456.00

ACT HD CLUTCH KIT 2011-14 5.0 COYOTE MUSTANGS

ACT HD CLUTCH KIT 2011-14 5.0 COYOTE MUSTANGS

FM13-HDG6 features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating...

  • Price: $472.99

ACT XACT PROLITE STEEL FLYWHEEL 4.6/5.0 8 BOLT CRANK

ACT XACT PROLITE STEEL FLYWHEEL 4.6/5.0 8 BOLT CRANK

ACT PRO LITE FLYWHEEL FOR 96-2010 4.6 2V 6 BOLT CRANK. FREE SHIPPING TO 48 STATES. ACT flywheels are lighter, stronger, and safer than stock cast flywheels. These Prolite ACT flywheels will give you quicker throttle response and improved...

  • Price: $293.00

ACT XACT PROLITE STEEL FLYWHEEL 96-2010 4.6 6 BOLT CRANK

ACT XACT PROLITE STEEL FLYWHEEL 96-2010 4.6 6 BOLT CRANK

ACT PRO LITE FLYWHEEL FOR 96-2010 4.6 2V 6 BOLT CRANK. FREE SHIPPING TO 48 STATES. ACT flywheels are lighter, stronger, and safer than stock cast flywheels. These Prolite ACT flywheels will give you quicker throttle response and improved...

  • Price: $293.00

AEROSPACE COMPONENTS 82-92 CAMARO FRONT DRAG RACE BRAKE KIT

AEROSPACE COMPONENTS 82-92 CAMARO FRONT DRAG RACE BRAKE KIT

AEROSPACE COMPONENTS FRONT DRAG BRAKE KIT. 4 Piston Heavy Duty Front Drag Race Brake Kit 82-92 CAMARO Billet Aluminum 4 Piston Calipers Billet Aluminum Hubs 4 3/4 and 4 1/2, 5 Lug Pattern For Cars Under 3000 lbs

  • Price: $716.61

AEROSPACE COMPONENTS G-BODY -S10 FRONT DRAG RACE BRAKE KIT

AEROSPACE COMPONENTS G-BODY -S10 FRONT DRAG RACE BRAKE KIT

AEROSPACE COMPONENTS FRONT DRAG BRAKE KIT. 4 Piston Heavy Duty Front Drag Race Brake Kit 1979-88 GM G-Body, 1982-02 S-10 Billet Aluminum 4 Piston Calipers Billet Aluminum Hubs 4 3/4 and 4 1/2, 5 Lug Pattern For Cars Under 3000 lbs Billet Aluminum...

  • Price: $716.61

AJE TUBULAR K MEMBER 2005-14 MUSTANG

AJE TUBULAR K MEMBER 2005-14  MUSTANG

The Anthony Jones Tubular Crossmwmber for 79-04 Mustangs is the industry standard. New design lets you choose the mounts you need...K mems include poly rack mount bushings. Works with 1'' drop rack, Pinto or Mustang rack. 2.5'' Extra header...

  • Price: $359.00

AUTOMETER TACH ADAPTER 1996-2014 FORD

AUTOMETER TACH ADAPTER 1996-2014 FORD

These tachometer adapters are designed for vehicles with coil pack or coil-over-plug ignition systems where no tachometer output or signal wire is available. They allow most late model distributorless vehicles to have a tachometer and/or shift...

  • Price: $96.99

BBK 2015/ GT LONG TUBE HEADERS FREE SHIPPING

BBK 2015/ GT LONG TUBE HEADERS FREE SHIPPING

2015-2016 Ford Mustang GT CERAMIC COATED Long Tube Full Length Exhaust Headers are Now Available in 1-3/4" and 1-7/8" CHOOSE SIZE FROM MENU Take a first look at the 2015 Ford Mustang 5.0 direct fit Full length Long Tube Exhaust headers and see...

  • Price: $649.90

BBK 2015/ O2 EXTENSIONS

BBK 2015/ O2 EXTENSIONS

Due to the fact that the O2 sensors are relocated on ALL long tube headers including other manufacturers- These extensions are a must when Installing Full Length Headers on 2015/ UP Ford Mustang applications - These BBK O2 wire harness extensions...

  • Price: $59.99

BBK 2015/ SHORT MID PIPES FOR LONG TUBES

BBK 2015/ SHORT MID PIPES FOR LONG TUBES

These BBK Performance short mid pipes are specifically designed to be used with BBK CNC series long tube exhaust headers for the 2015 up Mustang 5.0 GT to complete installation to your factory resonator box or resonator delete X pipe.(if...

  • Price: $219.00

BBK 2015/GT BLACKOUT COLD AIR KIT FREE SHIPPING

BBK 2015/GT  BLACKOUT COLD AIR KIT FREE SHIPPING

Want to add up to 20HP & 20 ft/lb torque, well you need a BBK 2015-16 BLACKOUT Ford Mustang GT Cold Air Induction Kits that are designed to improve airflow and maximize horsepower and torque on the 2015-16 Mustang GT without modifications....

  • Price: $349.95

BBK 2015/GT COLD AIR KIT FREE SHIPPING

BBK 2015/GT COLD AIR KIT FREE SHIPPING

Want to add up to 20HP & 20 ft/lb torque, well you need a BBK 2015-16 Ford Mustang GT Cold Air Induction Kits that are designed to improve airflow and maximize horsepower and torque on the 2015-16 Mustang GT without modifications. This BBK...

  • Price: $369.90

BIG SHOW PURGE KIT 4AN

BIG SHOW PURGE KIT 4AN

  • Evacuates Air From Main Feed Line
  • 11 Amp Draw
  • Keep Track Times Consistent
  • Improve 60ft Times
  • Huge Nitrous Plume Effect
  • Works With Any Brand System
  • All Hardware Included

  • Price: $139.99

BIG SHOW PURGE KIT 6AN

BIG SHOW PURGE KIT 6AN

  • Evacuates Air From Main Feed Line
  • 11 Amp Draw
  • Keep Track Times Consistent
  • Improve 60ft Times
  • Huge Nitrous Plume Effect
  • Works With Any Brand System
  • All Hardware Included

  • Price: $139.99

BILLET ADJUSTABLE TIMING POINTER 429-460

BILLET ADJUSTABLE TIMING POINTER 429-460

BILLET TIMING POINTER FOR 429-460 BIG BLOCK FORDS BLACK ANODIZED. 

  • Price: $69.90

BILLET ALUMINUM 8.8 MAIN CAPS

BILLET ALUMINUM 8.8 MAIN CAPS

STRANGE ENGINEERING 8.8 BILLET ALUMINUM MAIN CAPS. REQUIRES MACHINING. SIGNIFICANTLY IMPROVES REAR END STRENGTH

  • Price: $86.99

BILLET TIMING POINTER SBF STOCK BLOCKS W 5/16'' BOLT

BILLET TIMING POINTER SBF STOCK BLOCKS W 5/16'' BOLT

BILLET TIMING POINTER FOR SBFSTOCK BLOCKS 5/16''BOLTS. 11 OCLOCK TAB POSITION. BLACK ANODIZED

  • Price: $59.90

BILLET TIMING POINTER SBF SVO/DART BLOCKS W/ 3/8 BOLT

BILLET TIMING POINTER SBF SVO/DART BLOCKS W/ 3/8 BOLT

BILLET TIMING POINTER FOR SBF SVO/DART BLOCKS .3/8 BOLTS. 11 OCLOCK TAB POSITION. BLACK ANODIZED

  • Price: $59.90

BLOCK PLATE, 390-428 FE ENGINES

BLOCK PLATE, 390-428 FE ENGINES

Performance Automatic Engine To Bellhousing Separator Plate FOR FE 390-427-428 FORDS.

  • Price: $109.95

BLOCK PLATE, 4.6 5.0 MOD MOTOR

BLOCK PLATE, 4.6 5.0 MOD MOTOR

Performance Automatic Engine To Bellhousing Separator Plate for 4.6 ,5.0 COYOTE engines. 

  • Price: $66.90

BLOCK PLATE, 429-460 bbf

BLOCK PLATE, 429-460 bbf

Performance Automatic Engine To Bellhousing Separator Plate FOR 429-460 FORDS.

  • Price: $109.95

BMR Suspenion Sway Bar Kit With Bushings; 2015-2017 Mustang

BMR Suspenion Sway Bar Kit With Bushings; 2015-2017  Mustang

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or...

  • Price: $449.00

BMR Suspension 2015-2017 Cradle Bushing Lockout Kit

BMR Suspension 2015-2017 Cradle Bushing Lockout Kit

Reduce Wheelhop, bushing deflection, and cradle movement on your S550 Mustang with a Cradle Bushing Lockout Kit from BMR Suspension. Built from 6061-T6 billet aluminum, stainless steel, and heavy-duty 1 5/8-inch DOM steel tubing, BMR’s...

  • Price: $189.95

BMR Suspension Bushing Kit, Rear Cradle, Delrin 2015-17 Mustang

BMR Suspension Bushing Kit, Rear Cradle, Delrin 2015-17 Mustang

Eliminate rear cradle movement in your S550 Mustang with a Delrin Rear Cradle Bushing Kit from BMR Suspension. The OE bushings are designed with air pockets and are made from soft rubber. These “voids”, coupled with soft material...

  • Price: $145.00

BMR Suspension Chassis Brace 4 Point 2015-17 Mustang

BMR Suspension Chassis Brace 4 Point 2015-17 Mustang

Increase steering stability, K-member rigidity, and reduce front alignment changes on your S550 Mustang with a front Chassis Brace from BMR Suspension. The factory K-member and lower control arm mount can deflect under hard braking and extreme...

  • Price: $124.95

BMR Suspension Chassis Jacking Rail 2015-17 Mustang

BMR Suspension Chassis Jacking Rail 2015-17 Mustang

Add lift points and extra rigidity to your S550 Mustang with bolt-on Chassis Jacking Rails from BMR Suspension. Built from heavy-duty 1.5-x 2-inch boxed tubing and 3/16-inch laser-cut, CNC-formed plate steel, BMR’s Chassis Jacking Rails are...

  • Price: $259.00

BMR Suspension Driveshaft Safety Loop;Front; 2015-2017 Mustang

BMR Suspension Driveshaft Safety Loop;Front; 2015-2017 Mustang

Protect your 2011 and newer Mustang, while complying with NHRA safety rules with a Driveshaft Safety Loop from BMR Suspension. If you drag race your S197 Mustang, chances are you need a driveshaft safety loop to be NHRA legal. Built from 1/4-inch...

  • Price: $133.99

BMR Suspension End Link Kit For Sway Bars, 2015-2017 Mustang

BMR Suspension End Link Kit For Sway Bars, 2015-2017 Mustang

The amount of force exerted on the sway bar end link is staggering—especially if you’ve upgraded to an aftermarket sway bar, like BMR Suspension's SB043. The stock end links are weak and can bend or break. BMR’s ELK012 front and...

  • Price: $249.00

BMR Suspension Lowering Springs. Performance 2015-2017 Mustang

BMR Suspension Lowering Springs. Performance 2015-2017 Mustang

There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your S550 needs to perform, too! All BMR...

  • Price: $203.99

BMR Suspension Vertical Link, Rear Lower Control Arms, Spherica

BMR Suspension Vertical Link, Rear Lower Control Arms, Spherica

Launching harder, reducing wheel hop, and adding cornering consistency to your S550 Mustang is easy with billet aluminum Vertical Links from BMR Suspension. Stock stamped steel vertical links with soft rubber bushings deflect under load and...

  • Price: $269.95

Boost Leash, gear based, 1-6 gears

Boost Leash, gear based, 1-6 gears

New gear based Boost Leash now available. Simple 4 wire hook-up. Ign voltage, ground, AUX shift and a clutch switch input. Controller can run on co2 or manifold pressure. Has a lunch psi setting, number of gears setting, and psi and rate for each...

  • Price: $549.99

BRAIDED CARB FUEL LINE KIT HOLLEY 8AN BLACK

BRAIDED CARB FUEL LINE KIT HOLLEY 8AN BLACK

Allstar fuel lines, designed for Holley dual feed carburetors, feature braided -8 line with a -8AN inlet and -4AN fitting with cap for a fuel pressure gauge.  BLACK FITTINGS FOR 4150 HOLLEY

  • Price: $64.99

CAMARO 82-92 BOLT IN STEERING COLUMN

CAMARO 82-92  BOLT IN STEERING COLUMN

LIGHTWEIGHT BOLT IN STEERING COLUMN FOR GM 82-92 CAMAROS. INCLUDES QUIK RELEASE HUB AND 3-5 BOLT BILLET STEERING WHEEL ADAPTER. OFF ROAD USE ONLY! PIC IS OF A SIMILAR PRODUCT.

  • Price: $239.95

CAMARO/FIREBIRD 70-81 BOLT IN STEERING COLUMN

CAMARO/FIREBIRD 70-81  BOLT IN STEERING COLUMN

LIGHTWEIGHT BOLT IN STEERING COLUMN FOR GM 1970-1981 CAMARO/FIREBIRD. INCLUDES QUIK RELEASE HUB AND 3-5 BOLT BILLET STEERING WHEEL ADAPTER. OFF ROAD USE ONLY! Pic is of a similar part.

  • Price: $239.95

CANTON EFI ALUMINUM FUEL FILTER

CANTON EFI ALUMINUM FUEL FILTER

CANTON UPGRADED ALUMINUM FUEL FILTER FOR 84-97 FORD EFI CARS. DOUBLE THE FILTRATION OF OEM FILTERS.1 MICRON FILTER PREINSTALLED. 

  • Price: $122.99

CENTERFORCE DUAL FRICTION CLUTCH KIT 2005-10 4.6 FREE SHIPPING

CENTERFORCE DUAL FRICTION CLUTCH KIT 2005-10 4.6  FREE SHIPPING

2005-10 4.6 MUSTANG 10 SPLINE . Centerforce Dual Friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs....

  • Price: $424.99

CENTERFORCE DUAL FRICTION CLUTCH KIT 2011-13 FREE SHIPPING

CENTERFORCE DUAL FRICTION CLUTCH KIT 2011-13  FREE SHIPPING

2011-13 5.0 MUSTANG 23 SPLINE . Centerforce Dual Friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs....

  • Price: $529.95

CENTERFORCE DUAL FRICTION CLUTCH KIT 86-95 10.5'' 26 SPLINE

CENTERFORCE DUAL FRICTION CLUTCH KIT 86-95 10.5'' 26 SPLINE

86-95 5.0 26 SPLINE WITH 10.5'' CLUTCH FOR TKO TRANSMISSIONS. Centerforce Dual Friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high...

  • Price: $429.95

CENTERFORCE DUAL FRICTION CLUTCH KIT 86-95 10.5'' FREE SHIPPING

CENTERFORCE DUAL FRICTION CLUTCH KIT 86-95 10.5'' FREE SHIPPING

86-95 5.0 10 SPLINE WITH 10.5'' CLUTCH. Centerforce Dual Friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque...

  • Price: $429.95

CENTERFORCE DUAL FRICTION CLUTCH KIT 99-04 11'' FREE SHIPPING

CENTERFORCE DUAL FRICTION CLUTCH KIT 99-04 11''  FREE SHIPPING

96-04 11'' CLUTCH 10 SPLINE . Centerforce Dual Friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs....

  • Price: $439.95

COYOTE 5.0 SLEEVED BLOCK

COYOTE 5.0 SLEEVED BLOCK

NEW FORD BLOCK WITH DARTON SLEEVES INSTALLED. A MUST WHEN USING BOOST OR NITROUS AS THE STOCK BLOCKS ARE PRONE TO CRACK. 4-6 WEEK LEAD TIME. 

  • Price: $3,129.00

COYOTE SWAP ALUMINUM RADIATOR FOR 79-93 MUSTANG

COYOTE SWAP ALUMINUM RADIATOR FOR 79-93 MUSTANG

GRIFFIN ALUMINUM RADIATOR FOR FOX BODY COYOTE ENGINE SWAPS.

  • Price: $339.00

DEDENBEAR THUNDER T1 DELAY BOX FREE UPS

DEDENBEAR THUNDER T1 DELAY BOX FREE UPS

DEDENBEAR THUNDER T1 DELAY BOX 250 percent larger display than previous design * Lighted keypad and display for night use * NHRA-approved for use in all electronic classes * Four different delay modes: Cross-Talk, Crossover, Interface, and Delay...

  • Price: $339.95

EIBACH Pro Street S Coil Over Kit V6/GT/ECOBOOST

EIBACH Pro Street S Coil Over Kit V6/GT/ECOBOOST

Features & Benefits: - Height-Adjustable High-Performance Coil Overs - Lowers Mustang 1" to 2.5" in the Front and 1" to 2" in the Rear - Allows You to Quickly Adjust Each Wheel's Ride Height and Corner Weight - Provides a More Precise Turn-In...

  • Price: $1,309.99

EIBACH SPORTLINE LOWERING SPRING KIT FOR 2015 MUSTANG GT

EIBACH SPORTLINE LOWERING  SPRING KIT FOR 2015 MUSTANG GT

EIBACH SPORTLINE SPRINGS DROPS YOUR 2015 MUSTANG GT 1.5'' IN FRONT. 1.3'' IN REAR. Eibach SPORTLINE is the extreme-performance spring set created for the extreme enthusiast - the one who craves a race-car attitude for maximum street performance -...

  • Price: $279.99

ELECTRIC DUAL FAN AND SHROUD KIT 94-96 MUSTANG

ELECTRIC DUAL FAN AND SHROUD KIT 94-96 MUSTANG

NORTHERN ALUMINUM FAN SHROUD WITH DUAL 10" ELECTRIC FANS FOR 94-95 MUSTANG 5.0

  • Price: $469.95

F-BODY 1993-02 BOLT IN STEERING COLUMN KIT

F-BODY 1993-02 BOLT IN STEERING COLUMN KIT

LIGHTWEIGHT BOLT IN STEERING COLUMN FOR GM 1993-2002 GEN 4 F-BODY CARS. INCLUDES QUIK RELEASE HUB AND 3-5 BOLT BILLET STEERING WHEEL ADAPTER + GRANT DRAG RACE STEERING WHEEL

  • Price: $329.99

FAST BUMP STAGER

FAST BUMP STAGER

The FAST™ Bump Stager provides improved staging accuracy by allowing users to access the patented “transcreep” function found in FAST™ XFI™ without the added expense of converting the vehicle to a full XFI™...

  • Price: $428.99

FE BILLET ALUMINUM WATER NECK FOR 1.5'' HOSE

FE BILLET ALUMINUM WATER NECK FOR 1.5'' HOSE

CANTON RACING BILLET ALUMINUM WATER NECK FOR FE ENGINES. STAINLESS CAP SCREWS. ROTATES 360 DEGREES FOR MAX ADJUSTABILITY. FOR 1.5'' HOSE. 

  • Price: $104.99

FE BILLET ALUMINUM WATER NECK FOR 16AN HOSE

FE BILLET ALUMINUM WATER NECK FOR 16AN HOSE

 BILLET ALUMINUM WATER NECK FOR FE ENGINES. 16AN FITTING .STAINLESS CAP SCREWS.

  • Price: $59.99

FLOWMASTER 2015 MUSTANG EXHAUST SYSTEM AMERICAN THUNDER

FLOWMASTER 2015 MUSTANG EXHAUST SYSTEM AMERICAN THUNDER

FLOWMASTER AMERICAN THUNDER(2 CHAMBER STYLE) AXLE BACK EXHAUST SYSTEM FOR 2015 MUSTANG GT. ALUMINIZED BLACK FINISH. 3.0 '' DIAMETER WITH 4.0'' POLISHED TIPS.GET THAT FLOWMASTER SOUND ON YOUR NEW STEED! PLUS GET FREE 48 STATE SHIPPING!

  • Price: $499.00

FORD RACING 2015/ IRS 8.8 RING AND PINION SET 3.55 RATIO

FORD RACING 2015/ IRS 8.8 RING AND PINION SET 3.55 RATIO

FORD RACING RING AND PINION 3.55 RATIO  FITS 2015/ MUSTANG 8.8 WITH IRS AXLE. 

  • Price: $179.99

FORD RACING 2015/ IRS 8.8 RING AND PINION SET 3.73 RATIO

FORD RACING 2015/ IRS 8.8 RING AND PINION SET 3.73 RATIO

FORD RACING RING AND PINION 3.73 RATIO  FITS 2015/ MUSTANG 8.8 WITH IRS AXLE. 

  • Price: $179.99

FORD RACING BLACK ALUMINUM VALVE COVERS 351C

FORD RACING BLACK   ALUMINUM VALVE COVERS 351C

TALL BLACK ALUMINUM VALVE COVERS. FITS 351C/YATES HEADS. WITH RED LETTERING

  • Price: $189.90

FORD RACING BLUE 3 VALVE CAM COVERS

FORD RACING BLUE 3 VALVE CAM COVERS

Fits 2005-2010 3-valve 4.6L/5.4L engines Die-cast Blue powdercoat finish Laser etched "Ford Racing" logo Includes cam cover gaskets, VCT Solenoid grommet and fasteners 50-States Street Legal when installed with appropriate closed PCV hardware

  • Price: $289.99

FORD RACING COYOTE 5.0 FORGED CRANKSHAFT

FORD RACING COYOTE 5.0 FORGED CRANKSHAFT

Finish machined forged steel crankshaft as used in the production 2012-2013 Mustang Boss 302 engine 92.7 mm stroke Balance is compatible with the BOSS 302 connecting rod and piston assembly Requires balancing if used with another rod and piston assembly

  • Price: $369.90

FUSED SWITCH PANEL

FUSED SWITCH PANEL

Universal 4" x 7" switch panel includes one momentary start switch, one fused ignition switch and four fused accessory switches. Ideal for many motorsports applications, this panel features separately fused and switched circuits for a variety of...

  • Price: $109.90

GIFT CARD FOR HOLCOMB MOTORSPORTS SPECIAL!!!!!!!!!!!!

GIFT CARD FOR HOLCOMB MOTORSPORTS SPECIAL!!!!!!!!!!!!

CHRISTMAS SALE. $60.00 GIFT CARD ONLY $50.00!!!!!!!!!!!!!!

  • Price: $60.00

GM GLIDE T/350 OUTLAW SERIES CONVERTER 2500-2900

GM GLIDE T/350 OUTLAW SERIES CONVERTER 2500-2900

DAACO OUTLAW SERIES 10 '' TORQUE CONVERTER FOR  T350 AND GM POWERGLIDES WITH T350 SPLINE .2500-2900 STALL .ANTI BALLOON PLATE AND BRACED FOR TRANS BRAKE.

  • Price: $389.95

GM GLIDE T/350 OUTLAW SERIES CONVERTER 2900-3300

GM GLIDE T/350 OUTLAW SERIES CONVERTER 2900-3300

DAACO OUTLAW SERIES 10 '' TORQUE CONVERTER FOR  T350 AND GM POWERGLIDES WITH T350 SPLINE .2900-3300 STALL .ANTI BALLOON PLATE AND BRACED FOR TRANS BRAKE.

  • Price: $389.95

GM GLIDE T/350 OUTLAW SERIES CONVERTER 3300-3700

GM GLIDE T/350 OUTLAW SERIES CONVERTER 3300-3700

DAACO OUTLAW SERIES 10 '' TORQUE CONVERTER FOR  T350 AND GM POWERGLIDES WITH T350 SPLINE . 3300-3700 STALL .ANTI BALLOON PLATE AND BRACED FOR TRANS BRAKE.

  • Price: $389.95

GM GLIDE T/350 OUTLAW SERIES CONVERTER 3700-4100

GM GLIDE T/350 OUTLAW SERIES CONVERTER 3700-4100

DAACO OUTLAW SERIES 10 '' TORQUE CONVERTER FOR  T350 AND GM POWERGLIDES WITH T350 SPLINE . 3700-4100 STALL .ANTI BALLOON PLATE AND BRACED FOR TRANS BRAKE.

  • Price: $389.95

GM GLIDE T/350 OUTLAW SERIES CONVERTER 4100-4500

GM GLIDE T/350 OUTLAW SERIES CONVERTER 4100-4500

DAACO OUTLAW SERIES 10 '' TORQUE CONVERTER FOR  T350 AND GM POWERGLIDES WITH T350 SPLINE .4100-4500 STALL. ANTI BALLOON PLATE AND BRACED FOR TRANS BRAKE.

  • Price: $399.95

HARWOOD FIBERGLASS 87-93 MUSTANG FRONT BUMPER

HARWOOD FIBERGLASS 87-93 MUSTANG FRONT BUMPER

HARWOOD FIBERGLASS '87-'93 MUSTANG FRONT BUMPER CLIP

  • Price: $799.90

Heavy-Duty Adjustable Mustang Rear Lower Control Arms, 1979-1998

Heavy-Duty Adjustable Mustang Rear Lower Control Arms, 1979-1998

MAXIMUM MOTORSPORTS CONTROL ARMS ADJUST YOUR RIDE HEIGHT. Maximum Motorsports Heavy-Duty series Rear Lower Control Arms for the 1979-1998 Mustang improve traction and handling by reducing the unwanted deflection allowed by the stock soft rubber...

  • Price: $379.95

HURST PISTOL GRIP SHIFTER C4/C6 FWD SHIFT BLACK

HURST PISTOL GRIP SHIFTER C4/C6 FWD SHIFT BLACK

HURST PISTOL GRIP QUARTER STICK . BLACK ANODIZED SHIFTER HANDLE. FORWARD PATTERN C4/C6 CNC-machined from billet aluminum, the handle comes with a snap-action switch for roll control, nitrous, or trans-brake activation. INCLUDES CABLE, BACK UP SWITCH AND ATTACHING PARTS.

  • Price: $349.90

HURST PISTOL GRIP SHIFTER C4/C6 REVERSE SHIFT BLACK

HURST PISTOL GRIP SHIFTER C4/C6 REVERSE SHIFT BLACK

HURST PISTOL GRIP QUARTER STICK . BLACK ANODIZED SHIFTER HANDLE. REVERSE PATTERN C4/C6 CNC-machined from billet aluminum, the handle comes with a snap-action switch for roll control, nitrous, or trans-brake activation. INCLUDES CABLE, BACK UP SWITCH AND ATTACHING PARTS.

  • Price: $349.90

HURST PISTOL GRIP SHIFTER T350/T400 FWD SHIFT BLACK

HURST PISTOL GRIP SHIFTER T350/T400 FWD SHIFT BLACK

HURST PISTOL GRIP QUARTER STICK . BLACK ANODIZED SHIFTER HANDLE. FORWARD PATTERN T350/T400 CNC-machined from billet aluminum, the handle comes with a snap-action switch for roll control, nitrous, or trans-brake activation. INCLUDES CABLE, BACK UP SWITCH AND ATTACHING PARTS.

  • Price: $349.90

HURST PISTOL GRIP SHIFTER TH350/400 , GLIDE REVERSE SHIFT BLACK

HURST PISTOL GRIP SHIFTER TH350/400 , GLIDE REVERSE SHIFT BLACK

HURST PISTOL GRIP QUARTER STICK . BLACK ANODIZED SHIFTER HANDLE. REVERSE PATTERN GLIDE(FWD PATTERN AS WELL ON GLIDE) TH350, TH400. CNC-machined from billet aluminum, the handle comes with a snap-action switch for roll control, nitrous, or...

  • Price: $349.90

INJECTOR DYNAMICS ID1000 INJECTORS 2005/10 MUSTANG 4.6

INJECTOR DYNAMICS ID1000 INJECTORS 2005/10 MUSTANG 4.6

Injector Dynamics 1000cc Injectors - 60mm Length - 14mm Purple Top - 14mm Lower O-Ring (Set of 8)2005 -2010 MUSTANG 4.6. FREE SHIPPING r Injector Dynamics ID1000 Injectors: The ID1000 was the first offering from Injector Dynamics, and was also...

  • Price: $960.00

INJECTOR DYNAMICS ID1000 INJECTORS 2011-2014 MUSTANG GT 5.0

INJECTOR DYNAMICS ID1000 INJECTORS 2011-2014 MUSTANG GT 5.0

ID1000 Injector; 14mm (Purple) Top; Set of 8; For use w/ PnP Adapter 2011-14 MUSTANG 5.0. FREE SHIPPING Injector Dynamics ID1000 Injectors: The ID1000 was the first offering from Injector Dynamics, and was also the first injector to deliver a...

  • Price: $960.00

INJECTOR DYNAMICS ID1000 INJECTORS 97-04 MUSTANG 4.6 GT

INJECTOR DYNAMICS ID1000 INJECTORS 97-04 MUSTANG 4.6 GT

Injector Dynamics 1000cc Injectors - 60mm Length - 14mm Purple Top - 14mm Lower O-Ring (Set of 8)99-04 MUSTANG GT 4.6. FREE SHIPPING r Injector Dynamics ID1000 Injectors: The ID1000 was the first offering from Injector Dynamics, and was also the...

  • Price: $960.00

INJECTOR DYNAMICS ID1000 INJECTORS 99-04 COBRA MUSTANG 4.6

INJECTOR DYNAMICS ID1000 INJECTORS 99-04 COBRA MUSTANG 4.6

Injector Dynamics 1000cc Injectors - 60mm Length - 14mm Purple Top - 14mm Lower O-Ring (Set of 8)99-04 MUSTANG COBRA 4.6. FREE SHIPPING r Injector Dynamics ID1000 Injectors: The ID1000 was the first offering from Injector Dynamics, and was also...

  • Price: $960.00

INNOVATORS WEST 2011/ 5.0 COYOTE HARMONIC BALANCER FREE UPS

INNOVATORS WEST 2011/ 5.0 COYOTE  HARMONIC BALANCER FREE UPS

INNOVATORS WEST SFI 18.1 6 Rib stock diameter dual accessory drive damper for 2010-up 5.0L Coyote Mustangs. DUAL KEY WAY AVAILABLE

  • Price: $449.99

IRS REAR GRIP PACKAGE SUPER STREET /COMPETITION 99-04 COBRA

IRS REAR GRIP PACKAGE SUPER STREET /COMPETITION 99-04 COBRA

This Grip Box takes the Street IRS Grip Box a step further, enhancing performance to be suitable for competition. Improves handling and reduces wheel hop . Benefits Eliminates deflection allowed by stock rubber bushings Greatly reduces wheel hop...

  • Price: $925.99

JE COYOTE MULTI LAYER HEAD GASKET LH .039

JE COYOTE MULTI LAYER HEAD GASKET LH .039

JE MULTI LAYER HEAD GASKET FOR BLOWN/ NITROUS APPLICATIONS. A MUST ON DARTON SLEEVED BLOCKS. LH SIDE

  • Price: $95.99

JE COYOTE MULTI LAYER HEAD GASKET RH .039

JE COYOTE MULTI LAYER HEAD GASKET RH .039

JE MULTI LAYER HEAD GASKET FOR BLOWN/ NITROUS APPLICATIONS. A MUST ON DARTON SLEEVED BLOCKS.

  • Price: $95.99

JLT Oil Separator 3.0 (2011-17 GT; Boss; GT350)

JLT Oil Separator 3.0 (2011-17 GT; Boss; GT350)

ALL NEW JLT 3.0 Oil Separator The new design is the 3.0 because it hold 3oz of fluid where the original held a little over 1oz. Solid and thick Billet construction Easy install with full directions and videos NEW multi stage filter system...

  • Price: $135.00

LEASH 4-7 Stage Programmable Digital Nitrous Timer Controller

LEASH 4-7 Stage Programmable Digital Nitrous Timer Controller

4 Stage Programmable Digital Nitrous Timer Controller (optional 7 Stages) Features 4 70amp high current fused relay outputs that can be configured for time on and time off activations with .001 increments, ability to enable or disable any stage,...

  • Price: $477.95

LEASH ELECTRONICS BOOST LEASH/PULSE LEASH COMBO

This unit is a Boost Leash and a Pulse Leash combo controller. It is both units in one compact controller. There's no other controller of this kind anywhere but right here. Look at the individual Boost Leash and Pulse Leash for info on the units.

  • Price: $749.99

Leash Electronics Dual Wastegate line and fitting kit

Kit with all push fittings and 1/4" tubing to install a Boost Leash II on a two wastegate setup.

  • Price: $44.99

LEASH ELECTRONICS Large Firewall Plug Assembly

LEASH ELECTRONICS Large Firewall Plug Assembly

Large Firewall plug assembly. Features 60 pins rated at 18amps and 6 pins rated at 40amps. One half is flange mounted and the other half comes with a conduant cover so the wires can come out a nice round hole. Kit come with both plug halves, all...

  • Price: $84.99

LEXAN WINDOWS 99-04 MUSTANG WITH FRAME

LEXAN WINDOWS 99-04 MUSTANG WITH FRAME

99-04 MUSTANG LEXAN DOOR GLASS KIT. WORKS WITH MOST FIBERGLASS DOORS Includes window frames with tabs welded - Includes stainless hardware to install window - Includes tabs to mount frames - Includes 3ft of tubing to brace frames - Includes two scratch and abrasion proof windows

  • Price: $409.95

LOKAR MIDNIGHT SERIES THROTTLE CABLE 24''

LOKAR MIDNIGHT SERIES THROTTLE CABLE  24''

Lokar UNIVERSAL throttle cables have a Teflon inner liner and a BLACK BRAIDED  stainless steel outer covering, along with aluminum Clevis ends for smooth, no-bind cable operation.. Will work  on most V8 carb applications.

  • Price: $63.99

LOKAR TRANS DIPSTICK ASSY C4 FIREWALL MOUNT MIDNIGHT SERIES

LOKAR Flexible Aluminum Transmission Dipstick Ford C4 CASE FILL Firewall Mount. MIDNIGHT SERIES BLACK BRAIDED STAINLESS 

  • Price: $99.95

LUCAS EXTREME DUTY ATF. CASE OF 6

LUCAS EXTREME DUTY ATF. CASE OF 6

LUCAS EXTREME DUTY ATF TRANSMISSION FLUID. CASE OF 6. WORKS GREAT IN HIGH HORSEPOWER TURBO 400  OR GLIDE APPLICATIONS

  • Price: $51.99

MAGNAFLOW 2015 MUSTANG 3'' CATBACK EXHAUST FREE SHIPPING

MAGNAFLOW 2015 MUSTANG 3'' CATBACK EXHAUST FREE SHIPPING

MAGNAFLOW 2015 MUSTANG GT CATBACK EXHAUST Material: 100% Stainless Steel Tubing O.D. Size: 3in. System Type: Cat-Back TIP O.D. Size: 4.5in. TIP Quantity: 2 Single/Dual: Dual Exit Position: DUAL SPLIT REAR EXIT Features and Benefits: Lifetime...

  • Price: $1,189.00

MAGNAFLOW 2015 MUSTANG 3'' COMPETITION AXLE BACK EXH FREE UPS

MAGNAFLOW 2015 MUSTANG 3'' COMPETITION AXLE BACK EXH FREE UPS

MAGNAFLOW 2015 MUSTANG GT COMPETITION AXLE BACK EXHAUST. FREE SHIPPING! Material: 100% Stainless Steel Tubing O.D. Size: 3in. System Type: Axle-Back TIP O.D. Size: 4.5in. TIP Quantity: 2 Single/Dual: Dual Exit Position: DUAL SPLIT REAR EXIT...

  • Price: $1,067.99

MAGNAFLOW 2015 MUSTANG 3'' COMPETITION CATBACK EXH FREE SHIPPING

MAGNAFLOW 2015 MUSTANG 3'' COMPETITION CATBACK EXH FREE SHIPPING

MAGNAFLOW 2015 MUSTANG GT COMPETITION CATBACK EXHAUST Material: 100% Stainless Steel Tubing O.D. Size: 3in. System Type: Cat-Back TIP O.D. Size: 4.5in. TIP Quantity: 2 Single/Dual: Dual Exit Position: DUAL SPLIT REAR EXIT Features and Benefits:...

  • Price: $1,199.00

MANLEY PRO SERIES 4.6 /5.0 COYOTE I BEAM RODS 5.933

MANLEY PRO SERIES 4.6 /5.0 COYOTE I BEAM RODS 5.933

Manley Pro Series I-beam connecting rods are forged from 4340 aircraft-quality vacuum degassed material. They're fully machined to produce the strongest rods possible. These rods are shot-peened to Mil specs and are 100 percent individually...

  • Price: $1,349.00

MANLEY PRO SERIES ULTRA 4.6 /5.0 COYOTE I BEAM RODS 5.933

MANLEY PRO SERIES ULTRA  4.6 /5.0 COYOTE I BEAM RODS 5.933

Manley Pro Series I-beam connecting rods are forged from 4340 aircraft-quality vacuum degassed material. They're fully machined to produce the strongest rods possible. These rods are shot-peened to Mil specs and are 100 percent individually...

  • Price: $1,359.00

MANUAL BRAKE CONVERSION KIT 79-93 FOX BODY

MANUAL BRAKE CONVERSION KIT 79-93 FOX BODY

KIT TO CONVERT a Mustang from power brakes to manual brakes. Includes new pedal arm, firewall adapter block, pushrod, and hardware. Does not include master cylinder or brake lines. This kit fits 1979-93 Mustang Direct replacement master cylinders...

  • Price: $199.95

MANUAL BRAKE CONVERSION KIT 94-95 MUSTANG

MANUAL BRAKE CONVERSION KIT 94-95 MUSTANG

Kit to Convert a 94-95 Mustang from power brakes to manual brakes. Includes new pedal arm, firewall adapter block, pushrod, and hardware. Does not include master cylinder or brake lines. This kit fits 1994-95 Mustang Direct replacement master...

  • Price: $199.95

MANUAL STEERING SHAFT 79-93 MUSTANG (COLLAPSIBLE)

MANUAL STEERING SHAFT 79-93 MUSTANG (COLLAPSIBLE)

Solid Steering Shaft Assembly fits manual steering rack equipped 1979-93 Mustang NOTICE This new MMST-12.1 Steering Shaft fits the just-redesigned Flaming River manual steering racks. It also fits the previous generation of Flaming River manual...

  • Price: $239.99

MANUAL STEERING SHAFT 94-04 MUSTANG (COLLAPSIBLE)

MANUAL STEERING SHAFT 94-04 MUSTANG (COLLAPSIBLE)

Solid Steering Shaft Assembly, fits manual steering rack equipped 1994-04 Mustang Read the Muscle Mustangs & Fast Fords installation article . NOTICE This new MMST-15.1 Steering Shaft fits the redesigned Flaming River manual steering racks...

  • Price: $279.99

MAXIMUM MOTORSPORTS Drag Race Adj Rear Lower Control Arms 79-98

MAXIMUM MOTORSPORTS Drag Race Adj Rear Lower Control Arms 79-98

Drag Race series Rear Lower Control Arms, for 1979-98 Mustang, with adjustable-height spring perch and spherical bearings Overview Drag Race Rear Lower Control Arms are for 1979-98 Mustangs with engine torque levels ranging up into the...

  • Price: $459.90

MOSER REAR DISC BRAKES BIG FORD TORINO STYLE 2.5 OFFSET

MOSER  REAR DISC BRAKES BIG FORD TORINO STYLE 2.5 OFFSET

Moser Performance Dynamic Rear Drag Brake Kit - Big Ford (Old Style--2.36" Offset) Beginning with the caliper, Moser Engineering designed a competition race series 4 piston aluminum anodized forged billet caliper made of 6061 T6 billet aluminum...

  • Price: $669.95

MOSER PERFORMANCE REAR DISC BRAKES BIG FORD OLD STYLE

MOSER PERFORMANCE REAR DISC BRAKES BIG FORD OLD STYLE

Moser Performance Dynamic Rear Drag Brake Kit - Big Ford (Old Style--2.36" Offset) Beginning with the caliper, Moser Engineering designed a competition race series 4 piston aluminum anodized forged billet caliper made of 6061 T6 billet aluminum...

  • Price: $669.95

MOSER PERFORMANCE REAR DUAL CALIPER BRAKES BIG FORD OLD STYLE

MOSER PERFORMANCE REAR DUAL CALIPER BRAKES BIG FORD OLD STYLE

Moser Performance Dynamic DUAL CALIPER Rear Drag Brake Kit - Big Ford (Old Style--2.36" Offset) Beginning with the caliper, Moser Engineering designed a competition race series 4 piston aluminum anodized forged billet caliper made of 6061 T6...

  • Price: $1,095.00

MUSTANG 79-93 ALUMINUM RADIATOR W/ BUILT IN COOLER

MUSTANG 79-93 ALUMINUM RADIATOR W/ BUILT IN COOLER

ALLSTAR Aluminum direct fit radiators provide increased cooling over original copper radiator. Designed for performance Mustangs , features include machined billet aluminum filler necks, fully welded construction and two rows of large 1" tubes...

  • Price: $289.99

MUSTANG REAR COIL OVER KIT W/ VIKING SHOCKS C209

MUSTANG REAR COIL OVER KIT W/ VIKING SHOCKS C209

Built around the Viking Performance C209 Double Adjustable Coil Over Shock which has an 11.57" compressed height and 16.76 extended height. These shocks have 19 positions of compression and 19 positions of rebound adjustment for 361 different...

  • Price: $579.95

N2O Leash Single Stage Progressive Controller

N2O Leash Single Stage Progressive Controller

New Leash Electronics Single Stage Progressive controller. Features: Extremely easy to program, wire and setup. Nice large lcd screen. Very small and lightweight. Billet Aluminium housings. Looks AWESOME! 80MZ microprocessor for extremely...

  • Price: $424.90

NITROUS EXPRESS 10 LB NOS BOTTLE W/LIGHTNING VALVE

NITROUS EXPRESS 10 LB NOS BOTTLE W/LIGHTNING VALVE

NITROUS EXPRESS 10 LB NITROUS BOTTLE WITH THE FAMED LIGHTNING VALVE. POWDERCOATED WHITE.

  • Price: $239.99

POWER STEERING SHAFT 94-04 MUSTANG (COLLAPSIBLE)

POWER STEERING SHAFT 94-04 MUSTANG (COLLAPSIBLE)

Solid Steering Shaft Assembly, fits power steering rack equipped 1994-04 Mustang Read the Muscle Mustangs & Fast Fords installation article . Benefits Improves steering response by eliminating deflection allowed by the stock rubber rag joint....

  • Price: $279.99

PRO 8 STAGE NITROUS TIMER

PRO 8 STAGE NITROUS TIMER

Perfect of banking of up to 4 stages. 8 Stage Programmable Digital Nitrous Timer Controller Features 8 70amp high current fused relay outputs that can be configured for time on and time off activations with .001 increments, ability to enable or...

  • Price: $799.90

PRO SERIES UNIVERSAL DOOR HANDLE KIT

PRO SERIES UNIVERSAL DOOR HANDLE KIT

ONE PAIR OF RACECRAFT PRO SERIES  INNER DOOR HANDLES FOR FIBERGLASS OR CARBON DOORS. UNIVERSAL FIT. 

  • Price: $149.99

Pulse Leash Push Button Staging System

Pulse Leash Push Button Staging System

Staging system designed to help with consistant staging of high powered turbocharged race cars. No more need for extra braking to prespool a car anymore. No need to apply extreme, uncompfortable pressure on you brake peddle. Allows you to be much...

  • Price: $324.99

RACECRAFT 1979-2004 MUSTANG GM SWAP MILD STEEL K-MEMBER

RACECRAFT 1979-2004 MUSTANG GM SWAP MILD STEEL K-MEMBER

1979-2004 Mustang GM Swap Mild Steel K-Member. PRICE IS FOR KMEMBER W/O MOUNTS. ORDER MOUNTS FROM MENU.This setup is not your typical standard Mustang K-Member with some sort of motor mounts slapped onto it. K-Member utilizes a Manual Pinto Rack...

  • Price: $499.00

RACECRAFT 79-04 1 3/8'' ANTI ROLL BAR

RACECRAFT 79-04 1 3/8'' ANTI ROLL BAR

1979-2004 Mustang Anti-Roll Bar Assembly. This is not your typical less expensive Anti Roll Bar. Racecraft’s Anti Roll Bars address all the common problems of others on the market. When you weld a typical bar in your car with fixed aluminum...

  • Price: $499.00

RACECRAFT 79-04 MUSTANG 1/2'' SPHERICAL BUSHINGS

RACECRAFT 79-04 MUSTANG  1/2'' SPHERICAL BUSHINGS

RACECRAFT 1/2''SPHERICAL BUSHINGS

  • Replaces sloppy stock rubber bushing
    Provides solid pinion movement with no bind
    Not Recommended for normal street driving
    Fits 8.8 and 9" Housings

  • Price: $134.99

RACECRAFT 79-04 MUSTANG 12MM SPHERICAL BUSHINGS

RACECRAFT 79-04 MUSTANG  12MM SPHERICAL BUSHINGS

RACECRAFT 12MM SPHERICAL BUSHINGS

  • Replaces sloppy stock rubber bushing
    Provides solid pinion movement with no bind
    Not Recommended for normal street driving
    Fits 8.8 and 9" Housings

  • Price: $134.99

RACECRAFT 79-04 MUSTANG UPPER CONTROL ARM TORQUE BOX

RACECRAFT 79-04 MUSTANG UPPER CONTROL ARM TORQUE BOX

This upper control mounting assembly with will give you the best of both worlds: strength and adjustment. Featuring nine different ½” adjustment holes for precise tuning adjustments, with one hole located in the stock location. The...

  • Price: $574.99

RACECRAFT DA LOWER CONTROL ARMS OFFSET

RACECRAFT DA LOWER CONTROL ARMS OFFSET

1979-2004 Mustang Double Adjustable Lower Control Arms (Offset Spacing). These arms are constructed out of 1 1/4" x .095 4130 tubing with 3/4-16 Right hand & 3/4-16 LH 4130 CNC tube adaptors Tig welded to the end of the tube. Racecraft Inc....

  • Price: $279.95

RACEQUIP 5 POINT CAM LOCK SAFETY HARNESS BLACK FREE SHIPPING

RACEQUIP 5 POINT CAM LOCK SAFETY HARNESS  BLACK FREE SHIPPING

Lightweight Aluminum Alloy Cam Buckle Exceeds SFI 16.1 Rating (SFI Tags Affixed) NOT D.O.T. / FMVSS Certified for on Highway Use 5 Point Design - Single 2" Crotch Strap Pull Down or Up Lap Belt Adjusters Available Wide Engagement Cone For Easy...

  • Price: $149.95

REMOTE BATTERY DISCONNECT LEVER KIT

REMOTE BATTERY DISCONNECT LEVER KIT

TAYLOR push/pull battery disconnect mounting kit allows you to mount a battery disconnect switch to a roll cage tube with a weld-on bracket, then actuate it with the provided T-handle protruding through the rear panel of the vehicle. includes the...

  • Price: $52.45

Replacement Map Sensor for Boost Leash

Replacement Map Sensor for Boost Leash

Replacement map sensor for Boost Leash boost controllers

  • Price: $26.99

REPLAY XD1080 CAMERA SYSTEM FREE SHIPPING!!!!!

REPLAY XD1080 CAMERA SYSTEM FREE SHIPPING!!!!!

Replay XD1080 HD video action camera is all about small and simple. Starting with the small design of the original Replay XD action camera and a clean sheet of paper, we managed to put full HD into a small package. Featuring a water-resistant,...

  • Price: $249.95

S10 MANUAL MASTER CYL KIT ANGLED FIREWALL

S10 MANUAL MASTER CYL KIT ANGLED FIREWALL

83-02 S10 MASTER CYLINDER KIT WITH ADAPTER PLATE. USE ON TRUCKS  WITH ANGLED FIREWALL.KEEPS CYLINDER LEVEL. INCLUDES STRANGE 1.125 MASTER CYLINDER AND ALUMINUM ADAPTER PLATE. FOR USE WITH VEHICLES WITH 4 WHEEL BRAKES.

  • Price: $214.99

S10 MANUAL MASTER CYL KIT FLAT FIREWALL

S10 MANUAL MASTER CYL KIT FLAT FIREWALL

83-02 S10 MASTER CYLINDER KIT WITH ADAPTER PLATE. USE ON TRUCKS  WITH FLAT FIREWALL. INCLUDES STRANGE 1.125 MASTER CYLINDER AND ALUMINUM ADAPTER PLATE. FOR USE WITH VEHICLES WITH 4 WHEEL BRAKES.

  • Price: $169.00

SCE SBF PREMIUM VALVE COVER GASKETS

SCE SBF PREMIUM VALVE COVER GASKETS

Accu Seal Pro Valve Cover Gaskets for Ford 289-351W all, suitable for cast valve covers with blown and nitrous applications where severe vibration occurs. Material: Steel Core Composite, Teflon Coated on One Side; Thickness: .087″; Package Contents: 1 Pair.

  • Price: $39.95

SNIPER 5.0 COYOTE FABRICATED INTAKE EFI FREE SHIPPING

SNIPER 5.0 COYOTE FABRICATED INTAKE EFI FREE SHIPPING

HOLLEY Hi-Ram Fabricated Intake Manifold 2011-14 Ford 5.0L Coyote 90mm Throttle Body opening + Fuel Rail Kit Black with Sniper EFI logo. 3mm (1/8") thick T6061 Sheet Aluminum construction, more durable than competitive intakes 90mm Throttle Body...

  • Price: $529.90

SNOW PERFORMANCE STG 2 BOOST COOLER

SNOW PERFORMANCE STG 2 BOOST COOLER

This kit uses manifold boost pressure to determine when and how much water methanol to inject. Proportionally injecting according to boost pressure gives the most accurate delivery of water-methanol and allows the most cooling and performance...

  • Price: $472.45

SPARK PLUGS, AUTOLITE REVOLUTION HT PLUGS 2005/08 4.6 GT

SPARK PLUGS, AUTOLITE  REVOLUTION HT PLUGS 2005/08 4.6 GT

These Autolite Revolution HT spark plugs are designed to provide more space for additional intake valve and unobstructed intake ports. They will enhance power and create more efficient airflow without increasing the engine's size. The Revolution...

  • Price: $9.95

SPARK PLUGS, AUTOLITE DOUBLE PLATINUM 2005-13 DOHC 5.4

SPARK PLUGS, AUTOLITE DOUBLE PLATINUM 2005-13 DOHC 5.4

These Autolite Double Platinum spark plugs virtually eliminate plug gap erosion, reduce misfires, and provide 100,000 mile durability. They are the preferred spark plug technology for late model DIS ignition equipped vehicles. Autolite Double...

  • Price: $5.89

SPARK PLUGS, AUTOLITE XP XTREME 2011-14 5.0 32V

SPARK PLUGS, AUTOLITE XP XTREME 2011-14 5.0 32V

AUTOLITE XP XTREME SPARK PLUGS FOR 2011-14 5.0 32V ENGINES.IRIDIUM ENHANCED ELECTRODE.DELIVERS PREMIUM PERFORMANCE AND DURABLIITY FOR HIGH PERFORMANCE APPLICATIONS.

  • Price: $15.99

SPICER STEEL CORE 8.8 REAR END GASKET

SPICER STEEL CORE 8.8 REAR END GASKET

SPICER STEEL CORE 8.8 REAR COVER GASKET OFFERS MAXIMUM DURABILITY. ANTI STICK COATING MAKES THIS GASKET REUSABLE.

  • Price: $20.99

STAINLESS WORKS FOX BODY HEADERS 1 7/8'' X 3.5'' COLLECTOR

STAINLESS WORKS FOX BODY HEADERS 1 7/8'' X 3.5'' COLLECTOR

STAINLESS WORKS FOX BODY HEADERS 1 7/8'' X 3.5'' COLLECTORS Headers fit the following heads for the 9.5” tall deck: > AFR 205/225 > Dart 210/225 > Ford Performance Z304 > RHS Pro Action > Pro Topline > World Windsor Jr/Sr...

  • Price: $1,149.00

STAINLESS WORKS FOX BODY HEADERS 1 7/8'' X 3.5'' TFS,ETC 9.5

STAINLESS WORKS FOX BODY HEADERS 1 7/8'' X 3.5'' TFS,ETC  9.5

1979-93 Ford Mustang Foxbody Headers with 1 7/8''” diameter primaries and 3.5” OD (outside diameter) merge collectors for 9.5" tall deck aftermarket heads. Designed for use with cylinder heads that have a 2-o'clock, 8-o'clock bolt...

  • Price: $1,149.00

STAINLESS WORKS FOX BODY HEADERS 2'' X 3.5'' BRODIX T1

STAINLESS WORKS FOX BODY HEADERS 2'' X 3.5'' BRODIX T1

1979-93 Ford Mustang Foxbody Headers with 2” diameter primaries and 3.5” OD (outside diameter) merge collectors for 9.5" tall deck aftermarket heads. Headers fit the following heads for the 9.5” tall deck: > Brodix T1 F STD...

  • Price: $1,149.00

STAINLESS WORKS FOX BODY HEADERS 2'' X 3.5'' COLLECTOR

STAINLESS WORKS FOX BODY HEADERS 2'' X 3.5'' COLLECTOR

STAINLESS WORKS FOX BODY HEADERS 2'' X 3.5'' COLLECTORS Headers fit the following heads for the 9.5” tall deck: > AFR 205/225 > Dart 210/225 > Ford Performance Z304 > RHS Pro Action > Pro Topline > World Windsor Jr/Sr...

  • Price: $1,149.00

STAINLESS WORKS FOX BODY HEADERS 2'' X 3.5'' TFS,ETC 9.5 DECK

STAINLESS WORKS FOX BODY HEADERS 2'' X 3.5'' TFS,ETC  9.5 DECK

1979-93 Ford Mustang Foxbody Headers with 2” diameter primaries and 3.5” OD (outside diameter) merge collectors for 9.5" tall deck aftermarket heads. Designed for use with cylinder heads that have a 2-o'clock, 8-o'clock bolt pattern....

  • Price: $1,149.00

STAINLESS WORKS LS/LSX TURBO HEADERS UP & FORWARD

STAINLESS WORKS LS/LSX TURBO HEADERS UP & FORWARD

LS1 through LSX Up and Forward Turbo Headers. Header flanges are made with 3/8" thick 304 SS and tubing is .065 wall 304 SS with 1-7/8" Primaries and 3" Slip Fit Collectors. Headers are fully tig welded and back purged.

  • Price: $1,099.99

STRANGE 2005-11 MANUAL BRAKE KIT

STRANGE 2005-11  MANUAL BRAKE KIT

STRANGE/UPR RACE MANUAL MASTER CYLINDER KIT CONVERTS 2005-2011 MUSTANGS TO MANUAL BRAKES. » Eliminates brake booster » Black Anodized Mounting Plate » Brake Lines Exit Towards Fender » CNC Machined from Billet Aluminum...

  • Price: $169.99

Strange Rear Steel Brake Kit 8.8 Mustang w/c-clip BLACK

Strange Rear Steel Brake Kit 8.8 Mustang w/c-clip BLACK

Rear brake kit for OEM Mustang 8.8 housing ends. Kit includes 4 piston directional calipers, caliper mounting brackets, mounting hardware, B5010 soft brake pads, and 11.25 in. diameter two piece rotors. BLACK ANODIZED Brake offset = 2.500 in....

  • Price: $689.90

TEAM Z 2 INCH DROP SPINDLES

TEAM Z 2 INCH DROP SPINDLES

Our Team Z 2" Drop Spindles were designed to fit with standard style K-members that are utilizing Strange brakes. These have a standard arm length but provide a 2" drop to correct the steering geometry of your lowered Mustang. Everything is cut,...

  • Price: $579.95

TEAM Z 2'' DROP SPINDLE FOR OE STYLE K-MEMBER

TEAM Z 2'' DROP SPINDLE FOR OE STYLE K-MEMBER

Team Z 2" Drop Spindles were designed to fit with standard style K-members that are utilizing Strange brakes. These have a standard arm length but provide a 2" drop to correct the steering geometry of your lowered Mustang. Everything is cut, constructed, and welded IN HOUSE

  • Price: $595.00

TEAM Z 2'' DROP SPINDLE FOR OUTLAW K-MEMBER

TEAM Z 2'' DROP SPINDLE FOR OUTLAW K-MEMBER

New from Team Z Motorsports Outlaw Style Drop Spindles! These spindles provide a 2" drop while being paired up with any set of brakes that use a standard Mustang V8 Spindle. The spindles were designed to be used in conjunction with a stiletto...

  • Price: $595.00

TEAM Z 8.8 AXLE FRONT BRACE

TEAM Z 8.8 AXLE FRONT BRACE

Want to add some support to your 8.8" Housing? TEAM Z now offers a front brace to add support from your pinion! kit comes with weld on tabs that mount to your axle tubes between the control arm brackets, a set of adjustable support bars and...

  • Price: $119.90

TEAM Z 8.8 AXLE lower BRACE

TEAM Z 8.8 AXLE lower BRACE

Looking to add more support to your 8.8"? In addition to The forward brace, Team Z offers a weld on under brace for 8.8" housing. kit comes with a pre bent and notched tube to weld to the housing, and a gusset brace to add even more support to...

  • Price: $119.90

TEAM Z 8.8 AXLE lower BRACE S197 2005/

TEAM Z 8.8 AXLE lower BRACE S197 2005/

Looking to add more support to your 8.8"? In addition to The forward brace, Team Z offers a weld on under brace for 8.8" housing. kit comes with a pre bent and notched tube to weld to the housing, and a gusset brace to add even more support to...

  • Price: $119.90

TEAM Z COMPLETE 8.8. BRACE KIT

TEAM Z COMPLETE 8.8. BRACE KIT

Our Complete Brace Kit come with both the Forward Brace kit and the Bottom Brace to ensure that you get the most support out of your 8.8" housing. Both kits will limit twisting and bending that may occur with higher horsepower. The front holes by...

  • Price: $215.99

TEAM Z FULL LENGTH SUBFRAME CONNECTORS 79-93

TEAM Z FULL LENGTH SUBFRAME CONNECTORS 79-93

Designed to fit under the car and stiffen up the frame, these are a simple install! What separates TEAM Z from the competition? Their subframe connectors come with torque box reinforcements that insure to stiffen the frame rails from front to...

  • Price: $199.90

TEAM Z FULL LENGTH SUBFRAME CONNECTORS 94-98 MUSTANG

TEAM Z FULL LENGTH SUBFRAME CONNECTORS 94-98 MUSTANG

Designed to fit under the car and stiffen up the frame, these are a simple install! What separates TEAM Z from the competition? Their subframe connectors come with torque box reinforcements that insure to stiffen the frame rails from front to...

  • Price: $199.90

TEAM Z FULL LENGTH SUBFRAME CONNECTORS 99-04

TEAM Z FULL LENGTH SUBFRAME CONNECTORS 99-04

Designed to fit under the car and stiffen up the frame, these are a simple install! What separates TEAM Z from the competition? Their subframe connectors come with torque box reinforcements that insure to stiffen the frame rails from front to...

  • Price: $199.90

TEAM Z MOD MOTOR & MID PLATE KIT 79-04 MUSTANG

TEAM Z MOD MOTOR & MID PLATE KIT 79-04 MUSTANG

Motor and Mid Plate kit for swapping 4.6 and 5.4 Modular motors in any 79-04 Mustangs. Kits come with the motor plate and mid plate constructed out of 6061 Aluminum, all the grade 8 mounting hardware, and 3/16" steel mounting tabs to weld to the frame.CHOOSE 4.6 OR 5.4 FROM MENU

  • Price: $274.95

TEAM Z MOD MOTOR MOTOR/MID PLATE KIT

TEAM Z MOD MOTOR MOTOR/MID PLATE KIT

We now offer a Motor and Mid Plate kit for 4.6 and 5.4 Modular motors in any 79-04 Mustangs. Kits come with the motor plate and mid plate constructed out of 6061 Aluminum, all the grade 8 mounting hardware, and 3/16" steel mounting tabs to weld...

  • Price: $259.00

TEAM Z MUSTANG GAS PEDAL KIT

TEAM Z MUSTANG GAS PEDAL KIT

Looking to replace your flimsy old stock gas pedal?! Team Z now offers a stock location replacement gas pedal. It can be used on all 79-04 Mustangs and is a true performer! Our setup is designed to use both a stock cable or a Lokar style throttle...

  • Price: $199.00

TEAM Z MUSTANG REAR DRAG SPRINGS

TEAM Z MUSTANG REAR DRAG SPRINGS

Mustang stock location rear drag springs for cars that weigh between 2800-3200lbs Designed to replace the stock springs on an 79-93 mustang Lowers ride height 1 1/2 to 2 inches (Depending on weight of vehicle) improves geometry and 60 foot times...

  • Price: $174.99

TEAM Z MUSTANG REAR DRAG SPRINGS 94-04

TEAM Z MUSTANG REAR DRAG SPRINGS 94-04

Mustang stock location rear drag springs for cars that weigh 3300-3500lbs Designed to replace the stock springs on an 94-04 Mustang Lowers ride height 1 1/2 to 2 inches (Depending on weight of vehicle) improves geometry and 60 foot times Increase...

  • Price: $174.99

TEAM Z MUSTANG TUBULAR FRONT BUMPER SUPPORT 79-93

TEAM Z MUSTANG TUBULAR FRONT BUMPER SUPPORT 79-93

Front bumper support replacement kit for your 1987-1993 Mustang. This is a direct bolt in that will replace your old heavy factory bumper support, and shed some front end weight! Constructed out of 1'' round tube steel and plates fitted for 87-93...

  • Price: $169.00

TEAM Z MUSTANG TUBULAR FRONT BUMPER SUPPORT 94-98

TEAM Z MUSTANG TUBULAR FRONT BUMPER SUPPORT 94-98

Front bumper support replacement kit for your 1994-98 Mustang. This is a direct bolt in that will replace your old heavy factory bumper support, and shed some front end weight! Constructed out of 1'' round tube steel and plates fitted for 94-98...

  • Price: $169.00

TEAM Z NITROUS BOTTLE HOLDER 10 LB

TEAM Z NITROUS BOTTLE HOLDER 10 LB

Team Z Motorsports new nitrous bottle holders. UNCOATED! Custom cut on water jet in house, they make for a simple mounting solutions for your nitrous bottles. Holds most 10lb bottles. Lightweight design for serious racers. Easily fasten your...

  • Price: $199.00

TEAM Z NITROUS BOTTLE HOLDER 15 LB

TEAM Z NITROUS BOTTLE HOLDER 15 LB

Team Z Motorsports new nitrous bottle holders. UNCOATED! Custom cut on water jet in house, they make for a simple mounting solutions for your nitrous bottles. Holds most 15b bottles. Lightweight design for serious racers. Easily fasten your...

  • Price: $199.00

TEAM Z OUTLAW K MEMBER KIT

TEAM Z OUTLAW K MEMBER KIT

Kit includes Light weight 4130 moly Race K member, Molly adjustable A arms, Stilleto rack, tie rod kit (welding required) bump steer kit for stock or aftermarket spindles, coilover kit with springs and hardware. Choose year model and spring rate from menu.

  • Price: $1,675.00

TEAM Z Stock Location Drag Springs

TEAM Z Stock Location Drag Springs

Just like our Fox Drag Springs, we now have the 94-04 available! Mustang stock location rear drag springs for cars that weigh 3300-3500lbs Designed to replace the stock springs on an 94-04 Mustang Improves geometry and 60 foot times Increase...

  • Price: $174.99

TEAM Z TORQUE BOX REPLACEMENT KIT

TEAM Z TORQUE BOX REPLACEMENT KIT

Team Z now offers torque box reinforcement kits to replace your old worn out or tore up torque boxes. Our kits offer multiple holes to adjust your suspension geometry, and is tied in to the frame for extra support. We offer them in two different...

  • Price: $375.00

The “WorkPad”

The “WorkPad”

With the growing popularity of computer based ignitions, data acquisition and electronic fuel injection racers find themselves using computers. Don’t scratch your paint with a laptop or cord. We offer a new non slip cloth pad that will...

  • Price: $47.99

TRZ Mustang 79-04 Rear Anti-Roll Bar W/ BILLET ARMS

TRZ Mustang 79-04 Rear Anti-Roll Bar W/ BILLET ARMS

 TRZ XTREME-HEAVY DUTY Rear Anti Roll Bar kit for 79-04 Mustangs. FEATURES BILLET ARMS.

  • Price: $399.00

Universal Lightweight Removable Shifter Mount

Universal Lightweight Removable Shifter Mount

-4130 Chromoly Material

-Lightweight design

-Quick Disconnect Pin

-Pad Measures 1.5″ x 7″

-Universal Mounting

  • Price: $75.99

VIKING 2005/2014 DBBL ADJ REAR SHOCK

VIKING 2005/2014  DBBL ADJ REAR SHOCK

Viking Performance Double Adjustable Shock 79-04 MUSTANG REAR * 19 positions of compression & 19 positions of rebound adjustment for a total of 361 different valving combinations * Lightweight Aluminum Shock with a clear anodized finish *...

  • Price: $179.95

VIKING 79-04 DBBL ADJ REAR SHOCK

VIKING 79-04 DBBL ADJ REAR SHOCK

Viking Performance Double Adjustable Shock 79-04 MUSTANG REAR * 19 positions of compression & 19 positions of rebound adjustment for a total of 361 different valving combinations * Lightweight Aluminum Shock with a clear anodized finish *...

  • Price: $169.95

WEATHERTECH FLOOR LINERS 2012-2014 MUSTANG FRONT

WEATHERTECH FLOOR LINERS 2012-2014 MUSTANG FRONT

WEATHERTECH FLOOR LINERS FOR 2012-14 MUSTANGS ARE MOLDED TO FIT THE FLOORBOARDS FOR A PERFECT FIT. ALSO FEATURES SNAP IN RETAINERS JUST LIKE FACTORY! BLACK

  • Price: $119.95

WEATHERTECH FLOOR LINERS 2012-2014 MUSTANG REAR

WEATHERTECH FLOOR LINERS 2012-2014 MUSTANG REAR

WEATHERTECH  REAR FLOOR LINERS FOR 2012-14 MUSTANGS ARE MOLDED TO FIT THE FLOORBOARDS FOR A PERFECT FIT. ALSO FEATURES SNAP IN RETAINERS JUST LIKE FACTORY! BLACK

  • Price: $72.95

WEATHERTECH FLOOR LINERS 2015 MUSTANG FRONT

WEATHERTECH FLOOR LINERS 2015 MUSTANG FRONT

WEATHERTECH FLOOR LINERS FOR 2015 MUSTANGS ARE MOLDED TO FIT THE FLOORBOARDS FOR A PERFECT FIT. ALSO FEATURES SNAP IN RETAINERS JUST LIKE FACTORY! BLACK

  • Price: $127.95

WEATHERTECH FLOOR LINERS 2015 MUSTANG REAR

WEATHERTECH FLOOR LINERS 2015 MUSTANG REAR

WEATHERTECH  REAR FLOOR LINERS FOR 2015 MUSTANGS ARE MOLDED TO FIT THE FLOORBOARDS FOR A PERFECT FIT. ALSO FEATURES SNAP IN RETAINERS JUST LIKE FACTORY! BLACK

  • Price: $82.95

WHEELIE BAR WHEEL 5 HOLE

WHEELIE BAR WHEEL 5 HOLE

Billet 6061-T6 aluminum wheel is molded with a durable polyurethane tire that will not dent or give like a rubber tire. 4" O.D. wheel is 1-1/2" wide at axle and has a 3/8" through hole. Sold each. 5 HOLE DESIGN

  • Price: $94.99

WHEELIE BAR WHEEL 5 STAR

WHEELIE BAR WHEEL 5 STAR

Billet 6061-T6 aluminum wheel is molded with a durable polyurethane tire that will not dent or give like a rubber tire. 4" O.D. wheel is 1-1/2" wide at axle and has a 3/8" through hole. Sold each.

  • Price: $94.99

RACECRAFT 2005-2011 MUSTANG 4130 K-MEMBER

RACECRAFT 2005-2011 MUSTANG 4130 K-MEMBER

2005-2011 Racecraft Inc. Mustang K-Member is totally redesigned to eliminate the bulky and heavy OEM motor mount with a lightweight polyurethane dampened motor mount. Featuring 4130 tube construction and tig welded this is the best K-member...

  • Price: $799.00

Check Engine Light Eliminator O2Sensor Fitting with Adj. Jets

Check Engine Light Eliminator O2Sensor Fitting with Adj. Jets

 Male end threads into existing M18 x 1.5 O2 Bungs
- O2 Sensor Threads into female end
- Use one of the three (3) included "jets" to help fool the O2 Sensor and eliminate Check Engine Light Condition

  • Price: $23.59

2011-14 MUSTANG E FORCE SUPERCHARGER KIT COYOTE ENGINE

2011-14  MUSTANG  E FORCE SUPERCHARGER KIT COYOTE ENGINE

Edelbrock E-Force Mustang STAGE 1 systems for the 2011-14 COYOTE 5.0  will allow you to boost your Mustang to an AWESOME 559hp and 439 ft.-lbs. of torque!! FEEE 48 STATE SHIPPING

  • Price: $6,125.99

4150 Stinger Plate System With EFI Center Solenoid Bracket

4150 Stinger Plate System With EFI Center Solenoid Bracket

The all new NITROUS OUTLET Stinger Plate system is like no other carb style plate in the industry. Using the same technology as their nitrous Puck system, this plate can deliver up to a 500 HP wet shot of nitrous and fuel while completely...

  • Price: $849.95

4150 Stinger Plate System With Offset Solenoid Bracket

4150 Stinger Plate System With Offset Solenoid Bracket

The all new NITROUS OUTLET Stinger Plate system is like no other carb style plate in the industry. Using the same technology as the nitrous Puck system, this plate can deliver up to a 500 HP wet shot of nitrous and fuel while completely...

  • Price: $749.95

429-460 W/ A460/C460 HEADS 2 1/4'' X 4.0'' FOX BODY

429-460 W/ A460/C460 HEADS 2 1/4'' X 4.0'' FOX BODY

429-460 WITH A OR C 460 HEADS. 2 1/4' X 4.0'' COLLECTOR Accufab’s line of big tube headers fill the need, of the high performance and racing Mustang enthusiast, for a custom designed header at a fraction of the cost of “build it on...

  • Price: $849.95

429-460 W/ A460/C460 HEADS 2 1/8'' X 3.5'' FOX BODY

429-460 W/ A460/C460 HEADS 2 1/8'' X 3.5'' FOX BODY

429-460 WITH A OR C 460 HEADS. 2 1/8'' X 3.5'' COLLECTOR Accufab’s line of big tube headers fill the need, of the high performance and racing Mustang enthusiast, for a custom designed header at a fraction of the cost of “build it on...

  • Price: $809.95

429-460 W/ BLUE THUNDER HEADS 2 1/8 X 3.5'''' FOX BODY

429-460 W/ BLUE THUNDER HEADS 2 1/8 X 3.5'''' FOX BODY

429-460 WITH BLUE THUNDER HEADS. 2 1/8' X 3.5'' COLLECTOR Accufab’s line of big tube headers fill the need, of the high performance and racing Mustang enthusiast, for a custom designed header at a fraction of the cost of “build it on...

  • Price: $789.99

460 FOX BODY SOLID ENGINE MOUNTS

460 FOX BODY SOLID ENGINE MOUNTS

These Solid  engine mounts allow the 429-460 Ford "Big Block" to be installed into any Fox chassis vehicle.

  • Price: $145.95

AEROSPACE COMPONENTS MANUAL BRAKE KIT 2005-13 MUSTANG

AEROSPACE COMPONENTS MANUAL BRAKE KIT 2005-13 MUSTANG

 Aerospace Drag Race Master Cyl Kit

FITS 2005-2013 MUSTANG. INCLUDES ADJUSTABLE ROD, MASTER CYLINDER AND PLATE

  • Price: $209.95

AJE DRAG RACE REAR SUSPENSION KIT

AJE DRAG RACE  REAR SUSPENSION KIT

AJE SUSPENSION DRAG RACE REAR SUSPENSION KIT FOR 79-04 MUSTANGS CONSIST OF ANTI ROLL BAR, ADJUSTABLE LOWERS, AND UPPERS, PLUS SPHERICAL UPPER BUSHINGS.

  • Price: $849.00

AJE SUSPENSION STREET COMPLETE CAR SUSPENSION KIT 79-93 MUSTANG

AJE SUSPENSION  STREET COMPLETE CAR SUSPENSION KIT 79-93 MUSTANG

AJE SUSPENSION STREET SUSPENSION KIT FOR 79-93 MUSTANG Street Kits Include : K-Member, Engine Mounts, Bushing A-Arms, Adj Struts, Transmission Crossmember, Rear Bushing Upper and Lower Control Arms and Anti-Roll Bar PLEASE SPECIFY WHAT ENGINE MOUNTS YOU NEED

  • Price: $1,999.00

AJE SUSPENSION STREET COMPLETE CAR SUSPENSION KIT 94-98 MUSTANG

AJE SUSPENSION  STREET COMPLETE CAR SUSPENSION KIT 94-98 MUSTANG

AJE SUSPENSION STREET SUSPENSION KIT FOR 94-98 MUSTANG Street Kits Include : K-Member, Engine Mounts, Bushing A-Arms, Adj Struts, Transmission Crossmember, Rear Bushing Upper and Lower Control Arms and Anti-Roll Bar PLEASE SPECIFY WHAT ENGINE MOUNTS YOU NEED

  • Price: $1,999.00

AJE SUSPENSION STREET COMPLETE CAR SUSPENSION KIT 99-04 MUSTANG

AJE SUSPENSION  STREET COMPLETE CAR SUSPENSION KIT 99-04 MUSTANG

AJE SUSPENSION STREET SUSPENSION KIT FOR 99-04 MUSTANG Street Kits Include : K-Member, Engine Mounts, Bushing A-Arms, Adj Struts, Transmission Crossmember, Rear Bushing Upper and Lower Control Arms and Anti-Roll Bar PLEASE SPECIFY WHAT ENGINE MOUNTS YOU NEED

  • Price: $1,999.00

AJE SUSPENSION COMPLETE CAR SUSPENSION KIT 79-93 MUSTANG

AJE SUSPENSION COMPLETE CAR SUSPENSION KIT 79-93 MUSTANG

AJE SUSPENSION Race Kits Include : K-Member, Engine Mounts, Adj A-Arms, Adj Struts, Transmission Crossmember, Rear Adj Upper and Lower Control Arms, Anti-Roll Bar and Spherical Bearing. PLEASE SPECIFY WHAT ENGINE MOUNTS YOU NEED

  • Price: $2,299.00

AJE SUSPENSION COMPLETE CAR SUSPENSION KIT 94-98 MUSTANG

AJE SUSPENSION COMPLETE CAR SUSPENSION KIT 94-98 MUSTANG

AJE SUSPENSION Race Kits Include : K-Member, Engine Mounts, Adj A-Arms, Adj Struts, Transmission Crossmember, Rear Adj Upper and Lower Control Arms, Anti-Roll Bar and Spherical Bearing. PLEASE SPECIFY WHAT ENGINE MOUNTS YOU NEED

  • Price: $2,299.00

AJE SUSPENSION COMPLETE CAR SUSPENSION KIT 99-04 MUSTANG

AJE SUSPENSION COMPLETE CAR SUSPENSION KIT 99-04 MUSTANG

AJE SUSPENSION Race Kits Include : K-Member, Engine Mounts, Adj A-Arms, Adj Struts, Transmission Crossmember, Rear Adj Upper and Lower Control Arms, Anti-Roll Bar and Spherical Bearing. PLEASE SPECIFY WHAT ENGINE MOUNTS YOU NEED

  • Price: $2,299.00

ALUMINUM AIR TANK 19'' LONG

ALUMINUM AIR TANK 19'' LONG

Lightweight aluminum tanks are portable providing and easy way to air up tires. Welded tanks will not rust or corrode and are pressure tested to military specifications up to 300 PSI.

  • Price: $89.99

ALUMINUM AIR TANK VERTICAL

ALUMINUM AIR TANK VERTICAL

Lightweight aluminum tanks are portable providing and easy way to air up tires. Welded tanks will not rust or corrode and are pressure tested to military specifications up to 300 PSI.

  • Price: $89.99

BBK 2005-2014 CASTER CAMBER PLATES

BBK 2005-2014 CASTER CAMBER PLATES

These 2005-2014 Mustang Caster Camber kit will Improve the handling on your 05-14 Ford Mustang V6, GT and GT500. BBK Part# 2551 It allows the independent adjustment of the front wheels caster and camber to help improve overall front end alignment...

  • Price: $299.99

BILLET C4-8.8 CONVERSION YOKE KIT FOR 1310-1350 CONVERSION

BILLET C4-8.8 CONVERSION  YOKE KIT FOR 1310-1350 CONVERSION

STRANGE BILLET C4 1350 YOKE, STRANGE 8.8 1350 YOKE PLUS 2 1350-1310 CONVERSION HI IMPACT U JOINTS..USE THIS IF USING YOUR STOCK DRIVESHAFT WITH 1310 STYLE U JOINTS.ONE SIDE OF THE JOINT IS A 1310.. THE OTHER SIDE A 1350. MAKE YOUR DRIVETRAIN BULLETPROOF! ALSO INCLUDES U BOLT KIT FOR YOKE.

  • Price: $334.95

BOOK, HOW TO REBUILD C4-C6 TRANSMISSIONS

BOOK, HOW TO REBUILD C4-C6 TRANSMISSIONS

144 PAGES GUIDE TO REBUILDING C4-C6 TRANSMISSIONS The Ford C4 and C6 automatic transmissions have been equipped in millions of production rear-wheel drive cars and trucks since they were introduced in the 1960s (C4 in 1964, C6 in 1966). They...

  • Price: $24.95

CAMARO 82-02 BOLT IN STEERING COLUMN

CAMARO 82-02 BOLT IN STEERING COLUMN

1982-2002 Camaro Bolt On Steering Column. Steering columns bolt directly to the factory location there are no dash modifications required. The firewall end of the column locates the universal joint basically in the factory location and can be...

  • Price: $199.95

CAMARO 82-02 BOLT IN STEERING COLUMN COMPLETE KIT

CAMARO 82-02 BOLT IN STEERING COLUMN COMPLETE KIT

1982-2002 Camaro Bolt In Tubular Steering Column Complete Kit. Steering columns bolt directly to the factory location there are no dash modifications required. The firewall end of the column locates the universal joint basically in the factory...

  • Price: $439.95

COBRA JET 5.0 4V INTAKE

COBRA JET 5.0 4V INTAKE

Fits 2011-2014 Mustang GT and 2012-2013 Boss 302 Based on intake manifold used on naturally aspirated version of 2013 Mustang Cobra Jet Race Car Significant power increase above the M-9424-M50BR Ford Racing Boss 302 intake manifold with no loss...

  • Price: $949.90

DIXIE 3 SPEED ELECTRIC MEGA SHIFTER

DIXIE 3 SPEED ELECTRIC MEGA SHIFTER

THE "ROLLS ROYCE" OF 3-SPD AUTO SHIFTERS 3 SPEED CAD CAM DESIGNED AUTOMATIC TRANSMISSION SHIFTER Totally hands-free operation during run Complete shifter, NOT A KIT Includes Dixie Electric Solenoid Unit is for 3 speed, reverse automatic...

  • Price: $525.00

DRIVEN TURBO DIESEL 5W40 OIL GALLON

DRIVEN TURBO DIESEL 5W40 OIL  GALLON

Formulated For High Performance Turbo Diesels Not every high performance engine burns gasoline. Turbocharged diesel engines require robust anti-wear protection. These high output engines need defense against high temperatures. Driven DP40...

  • Price: $43.95

DYNATECH 2011/ 5.0 LONG TUBE HEADERS

DYNATECH 2011/ 5.0 LONG TUBE HEADERS

DYNATECH T304 STAINLESS STEEL LONG TUBE HEADERS 1 7/8' DIA. 3.0" COLLECTOR. FITS 2011/5.0 COYOTE ENGINES IN MUSTANG GT.

  • Price: $779.99

DYNATECH AUGER STYLE MUFFLER 3''

DYNATECH AUGER STYLE MUFFLER 3''

Dynatech auger-style muffler inserts are designed to slide into your 3 '' ID round tube piping. They weigh only 1 lb. and offer a 6-7 dB reduction over standard straight-through pipe.

  • Price: $17.50

DYNATECH AUGER STYLE MUFFLER 3.5''

DYNATECH AUGER STYLE MUFFLER 3.5''

Dynatech auger-style muffler inserts are designed to slide into your 3.5 '' ID round tube piping. They weigh only 1 lb. and offer a 6-7 dB reduction over standard straight-through pipe.

  • Price: $17.50

F-BODY 1993-02 BOLT IN STEERING COLUMN

F-BODY 1993-02 BOLT IN STEERING COLUMN

LIGHTWEIGHT BOLT IN STEERING COLUMN FOR GM 1993-2002 GEN 4 F-BODY CARS. INCLUDES QUIK RELEASE HUB AND 3-5 BOLT BILLET STEERING WHEEL ADAPTER.

  • Price: $239.95

FST PERFORMANCE RPM 300 FUEL FILTER

FST PERFORMANCE RPM 300 FUEL FILTER

The RPM300 series was designed to combine ultra high efficiency fuel filtration in the smallest possible package – only 4” tall! The high fuel flow capabilities and extremely low fuel flow restriction of the FloMax™ 300 series,...

  • Price: $106.95

FST PERFORMANCE RPM 350 FUEL FILTER

FST PERFORMANCE RPM 350 FUEL FILTER

The RPM350 series was designed to combine ultra high efficiency fuel filtration in the smallest possible package – only 4 3/4” tall! The high fuel flow capabilities and extremely low fuel flow restriction of the FloMax™ 350...

  • Price: $155.99

FST PERFORMANCE RPM 500 FUEL FILTER

FST PERFORMANCE RPM 500 FUEL FILTER

The FloMax RPM500 (old # RPM300M) was designed for high-performance, racing and marine applications to provide superior fuel/ water separation and fuel filtration at high fuel flows. Using the same design and high efficiency filtration technology...

  • Price: $187.95

FUEL PRESSURE WARNING LIGHT KIT

FUEL PRESSURE WARNING LIGHT KIT

This QuickCar Fuel Pressure Warning Light Kit features a Green Lens and a Sending Unit that is pre-set to activate at 4 PSI or lower.  All wiring included.  Sold as one complete kit.

  • Price: $22.95

G-FORCE BILLET TRANSMISSION CROSSMEMBER 79-93 MUSTANG

G-FORCE BILLET TRANSMISSION CROSSMEMBER 79-93 MUSTANG

THIS BILLET ALUMINUM TRANSMISSION CROSSMEMBER PROVIDES UNIQUE G FORCE STYLING WITH THE STRENGTH OF BILLET. DESIGNED AS A DIRECT REPLACEMENT FOR 1979-1993 FOX BODIES, IT ALSO PROVIDES CLEARANCE FOR DUAL EXHAUST SYSTEMS. THERE IS NO WELDING WITH...

  • Price: $148.95

HOLLEY 4150 HP 750 CFM CARB FREE SHIPPING!

HOLLEY 4150 HP 750 CFM CARB FREE SHIPPING!

HOLLEY 4150 HP CARBS. DOUBLE PUMPER MECHANICAL SECONDARY Updates include cast main bodies without choke horns, and smoothed venturi transitions for increased airflow. Since they're aimed directly at optimizing power and performance for racing...

  • Price: $629.95

LIGHTWEIGHT PLASTIC TANK ALUMINUM RADIATOR 19 X 28 FORD

LIGHTWEIGHT PLASTIC TANK ALUMINUM RADIATOR 19 X 28 FORD

Uniquely designed UNIVERSAL STYLE plastic tank radiators with aluminum core offer over 22 percent weight savings to comparable aluminum tank radiators when filled with coolant. These performance radiators also provide 6 percent better cooling...

  • Price: $179.95

LIGHTWEIGHT PLASTIC TANK ALUMINUM RADIATOR 19 X 31 FORD

LIGHTWEIGHT PLASTIC TANK ALUMINUM RADIATOR 19 X 31 FORD

Uniquely designed UNIVERSAL STYLE 19 X 31 plastic tank radiators with aluminum core offer over 22 percent weight savings to comparable aluminum tank radiators when filled with coolant. These performance radiators also provide 6 percent better...

  • Price: $179.95

MUSTANG 2011-14 ALUMINUM 900HP DRIVESHAFT

MUSTANG 2011-14 ALUMINUM 900HP DRIVESHAFT

THE DRIVESHAFT SHOP 2011-14 Mustang GT and BOSS 302 6-Speed Manual and Automatic 1-Piece Aluminum Shaft with CV 900HP 3-1/2 Aluminum / 1350 has no clearance issues 1.1350 front u-joint with flange to mount up to the transmission 2. 3.5” 6061-T6...

  • Price: $799.95

MUSTANG CARBON FIBER DOOR KIT 79-93

MUSTANG CARBON FIBER DOOR KIT 79-93

CARBON FIBER DOOR KIT FOR 79-93 MUSTANGS. DOORS WEIGH 7 LBS EA. KIT INCLUDES 2 DOORS, PRECUT LEXAN WINDOWS, DOOR LATCH AND STRIKER , AND DOOR HINGES. MUST SHIP TRUCK FREIGHT. 48 STATE SHIPMENT ONLY. CALL FOR OTHER AREAS. WE WILL ADJUST THE...

  • Price: $2,199.00

Nitrous Outlet Heated 10lb/15lb Nitrous Bottle Bracket

Nitrous Outlet Heated 10lb/15lb Nitrous Bottle Bracket

Concise Bottle Pressure. The billet bottle brackets hold the bottle securely to the heating element to insure proper heat transfer. Bottle pressure is key in a well performing nitrous system, and helps keep a consistent flow of nitrous pass after...

  • Price: $159.95

NITROUS SOLENOID MOUNTS 4150 CARB

NITROUS SOLENOID MOUNTS 4150 CARB

Billet aluminum nitrous brackets securely mount and hold single stage nitrous and fuel solenoids. Brackets fasten to the carb mounting studs. CLEAR ANODIZED FOR 4150 CARBS.

  • Price: $59.99

NITROUS SOLENOID MOUNTS 4500 CARB

NITROUS SOLENOID MOUNTS 4500 CARB

Billet aluminum nitrous brackets securely mount and hold single stage nitrous and fuel solenoids. Brackets fasten to the carb mounting studs. CLEAR ANODIZED FOR 4500 CARBS.

  • Price: $59.99

OIL PRESSURE WARNING LIGHT KIT

OIL PRESSURE WARNING LIGHT KIT

This QuickCar Oil Pressure Warning Light Kit features a Red Lens and a sending unit that is pre-set to activate at 20 PSI or lower.  All wiring included.  Sold as one complete kit.

  • Price: $22.95

PROGEAR CAMDEX TIMING CHAIN SET 302-351W

PROGEAR CAMDEX TIMING CHAIN SET 302-351W

PROGEAR TIMING SET FOR 302-351W WITH ADJUSTABLE CAM GEAR. CamDex - A New Concept ALL TIMING ADJUSTMENTS ARE MADE ON THE CAM SPROCKET Lightweight single unit construction which cannot come apart No bolts to come loose (or come OFF) Allows you to...

  • Price: $109.95

QUICK FUEL 125GPH FUEL PUMP AND REGULATOR

QUICK FUEL 125GPH FUEL PUMP AND REGULATOR

This QUICK FUEL electric fuel pump is designed to provide consistent performance and fuel control for both street and strip applications. 125 GPH Flow Rate Constructed of Lightweight Steel and Aluminum 14 PSI Maximum Pressure Features 3/8" NPT...

  • Price: $114.95

QUICK FUEL 155GPH FUEL PUMP

QUICK FUEL 155GPH FUEL PUMP

This QUICK FUEL 155 GPH electric fuel pump is designed to provide consistent performance and fuel control for both street and strip applications. 155 GPH Flow Rate Constructed of Lightweight Steel and Aluminum 14 PSI Maximum Pressure Features...

  • Price: $149.95

QUICK FUEL 175 GPH FUEL PUMP

QUICK FUEL 175 GPH FUEL PUMP

This QUICK FUEL 155 GPH electric fuel pump is designed to provide consistent performance and fuel control for both street and strip applications. 155 GPH Flow Rate Constructed of Lightweight Steel and Aluminum 14 PSI Maximum Pressure Features...

  • Price: $209.99

QUICK FUEL BLACK DIAMOND 600 CFM VACUUM SECONDARY CARB

QUICK FUEL BLACK DIAMOND 600 CFM VACUUM SECONDARY CARB

600 CFM, Vacuum Secondary Carburetor. Single inlet, side hung fuel bowls for direct replacement of O.E. carbs. Equipped with fully adjustable electric choke. Vacuum secondaries with QuickSet™ adjustment. Changeable idle air and high speed...

  • Price: $379.95

QUICK FUEL SLAYER SERIES 750CFM CARB

QUICK FUEL SLAYER SERIES 750CFM CARB

The new Slayer Series 750 is designed with many of the same engineering innovations and features that are built into all QFT™ race-winning carburetors. The unique design utilizes a secondary metering plate with changeable jets, eliminating...

  • Price: $318.99

RACECRAFT 1979-2004 Mustang TURBO Front Tube Stiletto K-Member

RACECRAFT 1979-2004 Mustang TURBO Front Tube Stiletto K-Member

This K-Member is specifically designed to accommodate big inch twin turbo applications. ***The 2 support tubes on either side have been sent loose and MUST BE INSTALLED after exhaust plumbing has been fabricated. SIDE BRACE TUBES MUST BE...

  • Price: $679.00

ROYAL PURPLE OIL FILTER 5.0 COYOYE

ROYAL PURPLE OIL FILTER  5.0 COYOYE

EXTENDED LIFE OIL FILTER FOR 2011/5.0 COYOTE MUSTANGS

  • Price: $12.95

STIFFLERS Driveshaft Safety Loop ('79-'98) and Other Ford's & GM

STIFFLERS Driveshaft Safety Loop ('79-'98) and Other Ford's & GM

This one of a kind driveshaft safety loop will save you and your investment from the destructive effects of a broken driveshaft. Quick and easy bolt-in application requires no drilling or welding and weighs almost 2 lbs. less than most popular...

  • Price: $119.95

STIFFLERS FIT STYSTEM CHASSIS STIFFENER 05/14 MUSTANG

STIFFLERS FIT STYSTEM CHASSIS STIFFENER 05/14 MUSTANG

Twisting, bending, twisting, bending......unlike a human, this is NOT the way a car stays in shape! Even everyday driving puts your car through a workout of twists and bends. Installing Stifflers FIT System integrates the front and rear subframe...

  • Price: $274.95

STINGER NITROUS PLATE 4150

STINGER NITROUS PLATE 4150

The Stinger plate has a unique cone shaped “stinger” that protrudes from the bottom portion of the plate into the center of the intake throat. Each Stinger has 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15...

  • Price: $359.99

STINGER NITROUS PLATE KIT 4500

STINGER NITROUS PLATE KIT 4500

The Stinger plate has a unique cone shaped “stinger” that protrudes from the bottom portion of the plate into the center of the intake throat. Each Stinger has 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15...

  • Price: $359.99

8.8 PINION YOKE, FORGED STEEL, 1350 JOINT SIZE

8.8 PINION YOKE, FORGED STEEL, 1350 JOINT SIZE

STRANGE ENGINEERING Pinion Yoke, Forged Steel, 30-Spline, 1350-Style Joint For Ford, 8.8 axles

  • Price: $89.90

THUNDER COVER PARACHUTE COVER

THUNDER COVER PARACHUTE COVER

HIGH QUALITY VINYL COVER FOR YOUR CHUTE. KEEPS IT DRY FOR OPTIMUM OPERATION. PROTECTS AGAINST SUN DAMAGE. RED BLUE BLACK WHITE OR ............ORANGE(SPECIAL ORDER) FREE SHIPPING

  • Price: $69.95

TRICK FLOW R SERIES CARB INTAKE FOR 289-302

TRICK FLOW R SERIES CARB INTAKE FOR 289-302

Trick Flow® R-Series Intake Manifolds for small block Ford 289-302 are designed for maximum power delivery in heavily modified street/strip and race engines that operate in the 3,500-7,500 plus rpm range—right where it’s needed...

  • Price: $349.99

TRICK FLOW R SERIES EFI INTAKE FOR 289-302

TRICK FLOW R SERIES EFI INTAKE FOR 289-302

Trick Flow® R-Series EFI intake manifolds offer maximum power delivery for your small block 302 Ford. These R-Series single plane manifolds are designed for performance in heavily modified street/strip and race engines operating in the...

  • Price: $399.99

ULTRA 8.8 REAR END GIRDLE VENTED

ULTRA 8.8 REAR END GIRDLE  VENTED

NEW! MADE IN THE USA 8.8 ALUMINUM REAR GIRDLE. ....VENTED...CONTROLS GEAR DEFLECTION AND CASE DISTORTION. INCREASES FLUID CAPACITY. CONVIENIENT FILL PLUG. PROVIDES ADDITIONAL CLEARANCE FOR LOWER GEAR RATIOS, MOUNTING BOLTS INCLUDED. WILL CLEAR PANHARD BAR ON 2005/ MUSTANGS

  • Price: $174.95

UPR TUBULAR STEEL K MEMBER KIT 79-93 MUSTANG

UPR TUBULAR STEEL K MEMBER KIT 79-93 MUSTANG

UPR's all new Mild Steel K-member saves weight while adding maximum header and oil pan clearance. Designed for the abuse of hardcore drag race, road race, and Street Enthusiasts. Most importantly it will handle the everyday wear and tear of city...

  • Price: $599.90

WATER TEMP WARNING LIGHT KIT

WATER TEMP  WARNING LIGHT KIT

This QuickCar Water Temperature Warning Light Kit features a Blue Lens and a sending unit that is pre-set to activate at 240 F degrees or higher. All wiring included.  Sold as one complete kit.

  • Price: $22.95

XS POWER 12 V AGM BATTERY

XS POWER 12 V AGM BATTERY

XS POWER 12V AGM BATTERY 12V AGM Starting Battery, Max Amps 2,000A CA: 550A Weight Lbs. – 25.57 Length – 6.65 in Height – 4.98 in Width – 7.04 in MAX Amps – 2000 CA – 550A RC – 55min. 586 and M6 Terminal Hardware Included 3 Year Warranty

  • Price: $179.99

YUKON GEAR DURA GRIP DIFFERENTIAL 8.8 31 SPLINE

YUKON GEAR DURA GRIP DIFFERENTIAL 8.8 31 SPLINE

Yukon Gear & Axle Dura Grip positraction 8.8 31 SPLINE carriers offer great traction and strength, and yet are not overly aggressive for the streets. Yukon Dura Grip positraction carriers are 4-spring, Raybestos composite, clutch-style,...

  • Price: $469.95

ZAMP SA2010 FULL FACE HELMET FREE SHIPPING!

ZAMP SA2010 FULL FACE HELMET FREE SHIPPING!

Fiberglass Lightweight Shell  Choose from White or Matte Black. 
Plush Fire Retardant Interior
3mm Shield with Tear Off Posts
Scalp and Chin Bar Ventilation with rear Exhausts
Pre-Drilled for Neck Restraint
Snell SA-2010

  • Price: $169.95

ZAMP SA2010 OPEN FACE HELMET FREE SHIPPING!

ZAMP SA2010 OPEN FACE HELMET FREE SHIPPING!

Fiberglass Lightweight Shell  Choose from White or Matte Black. 
Plush Fire Retardant Interior
3mm Shield with Tear Off Posts
Scalp and Chin Bar Ventilation with rear Exhausts
Pre-Drilled for Neck Restraint
Snell SA-2010

  • Price: $129.95

ZAMP SA2010 RZ-34 FULL FACE HELMET FREE SHIPPING!

ZAMP SA2010 RZ-34 FULL FACE HELMET FREE SHIPPING!

Composite Fiberglass Lightweight Shell 7-Top Air System in addition to Chin and Scalp Vents/Exhausts Plush Fire Retardant Interior Z-20 Series 3mm Shield with Tear Off Posts Removable/Washable Comfort Liner Pre-drilled Holes for Neck Restraint...

  • Price: $209.95